User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: Factory Default Settings
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
User’s Manual of WNAP-1110
-80-
A restricted source can be a specific IP address (e.g. 10.10.10.1), or a subnet - represented
as IP/BITS (e.g. 10.10.10.0/24). If an IP address of 0.0.0.0 is specified, the agent will accept
all requests under the corresponding community name.
5.8.2 Time Settings
Choose menu “System Tools→Time Settings”, and you can configure the system time and the auto reboot
time on the following screen. Click the "GET GMT" to update the time from the Internet with the pre-defined
servers or entering the customized server (IP Address or Domain Name) in the above frames.
Figure 5-60 Time Settings