User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: Factory Default Settings
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
User’s Manual of WNAP-1110
-55-
Figure 5-35 Add a new device
Step 2: Choose Enter the new device's PIN and enter the PIN code of the wireless adapter in the field
behind PIN in the above figure. Then click Connect.
The PIN code of the adapter is always displayed on the WPS configuration screen.
Step 3: For the configuration of the wireless adapter, please choose the option that you want to enter PIN
into the AP in the configuration utility of the WPS, and click Next.
Method Two: Enter the PIN of the AP into the configuration utility of your Wireless adapter
Step 1: Get the Current PIN code of the AP in Figure 5-32 (each AP has its unique PIN code).
Step 2: For the configuration of the wireless adapter, please choose the option that you want to enter the PIN
of the AP in the configuration utility of the Wireless adapter, and enter it into the field. Then click
Next
.
The default PIN code of the AP can be found in WPS configuration screen as shown in Figure
5-32.
Step 3. You will see the following screen when the new device has successfully connected to the network.