User's Manual
Table Of Contents
- Chapter 1. Product Introduction
- Chapter 2. Hardware Installation
- Chapter 3. Connecting the AP
- Chapter 4. Quick Installation Guide
- Chapter 5. Configuring the AP
- Chapter 6. Quick Connection to a Wireless Network
- Appendix A: Planet Smart Discovery Utility
- Appendix B: Factory Default Settings
- Appendix C: Troubleshooting
- Appendix D: Specifications
- Appendix E: Glossary
User’s Manual of WNAP-1110
-14-
Chapter 2. Hardware Installation
Please follow the instructions below to build the wireless network connection between WNAP-1110 and your computers.
2.1 Hardware Description
2.1.1 The Front Panel
The front panel provides a simple interface monitoring the AP. Figure 2-1 shows the front panel of WNAP-1110.
Front Panel
Figure 2-1 WNAP-1110 Front Panel
LED definition
Object Color State Description
On
Device power on
PWR Green
Off
Device power off
On
Device is initialising
Flash
The device is working properly
SYSTEM Green
Off
The device has a system error
On
There is a device linked to the corresponding port but no activity
Flash
Packets are transmitting or receiving
LAN Green
Off
LAN port is not connected
Wireless LED
WPS LED
WPS ButtonPower LED
System LED
LAN LED
WPS
WNAP-1110
LAN WLANSYSPWR WPS WPS