WNL-U553 Wireless USB Adapter Quick Installation Guide

Hardware Installation

1. Please connect WNL-U553 to your PC’s USB port. If your PC’s

USB interface is not USB 2.0, Windows will prompt you there

is a “High-Speed USB Device Plugged into non-High-Speed

USB hub”. Please don’t worry about this and keep installing.

2. After properly connect the WNL-U553 to your PC, Windows

will detect WNL-U553 and show you this dialog box. You can

see the device name in this dialog box. If the device name is

correct, please press ”Next” to the driver installation.