Wireless Access Point w/Bridge User's Manual

25
Add an user account Fill in the Username, Password and Re-Type Password
of the
new account to be added and then click Add
. Then this new account
will be added into the account table below. If you find any typo before
adding it and want to retype again. Just click Reset and Username
,
Password and Re-Type Password fields will be cleared.
Remove user account from the
table
If you want to remove some account from the table, select the
accounts you want to remove in the table and then click
Delete
Selected
. If you want remove all user accounts from the table, just
click Delete All button.
Reset Click Reset will clear your current selections.
Authentication Client table The RADIUS server can also be an authenticat
ion center of your
network. This table records the clients of the RADIUS server that
need to authenticate wireless LAN or LAN users. Authentication client
information includes the Client IP and Secret Key
. An
authentication client has to use the Secret Key
to login to the
RADIUS server before it can start to authenticate users.
Add an authentication client Fill in the Client IP, Secret Key and Re-Type Secret Key
of the
new authentication client to be added and then click Add
. Then this
new a
uthentication will be added into the authentication client table
below. If you find any typo before adding it and want to retype again.
Just click Reset and Client IP, Secret Key and Re-Type Secret
fields will be cleared.
Remove authentication client
from the table
If you want to remove some authentication client from the table, select
the authentication clients you want to remove in the table and then
click Delete Selected
. If you want remove all user authentication
clients from the table, just click Delete All button.
Reset Click Reset will clear your current selections.
After the RADIUS server configuration finished, please refer to section 3.10 to restart your WAP-1963A to
make the RADIUS server affect to your network.