24-Port 10/100Mbps with PoE + 2G TP/SFP Combo Managed Ethernet Switch User's Manual

1. Select <Edit>
2. Radius Server IP: set the Radius Server IP address.
3. Shared Key: set an encryption key for using during authentication sessions with the specified
radius server. This key must match the encryption key used on the Radius Server.
4. NAS, Identifier: set the identifier for the radius client.
5. Server Port: set the UDP destination port for authentication requests to the specified Radius
Server.
6. Accounting Port: set the UDP destination port for accounting requests to the specified Radius
Server.
7. Select <Apply>
802.1x System Configuration interface
3.4.8.5.3 Per Port Setting
The State provides Disable, Accept, Reject and Authorize. Use “Space” key change the state value.
。 Reject: the specified port is required to be held in the unauthorized state.
。 Accept: the specified port is required to be held in the Authorized state.
。 Authorized: the specified port is set to the Authorized or Unauthorized state in accordance with
the outcome of an authentication exchange between the Supplicant and the authentication server.
。 Disable: The specified port is required to be held in the Authorized state.