User Manual

User’s Manual of WGSW-24040 / WGSW-24040R
Buttons
: Click to refresh the page immediately.
: Clears the counters for all ports.
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
.4.4 SFP Information
erational status of an SFP module via the SFP Module Information page. This page shows the
operational status, such as the transceiver type, speed, and wavelength and supports distance of SFP module on a specific
4
You can check the physical or op
interface. You can also use the hyperlink of port no. to check the statistics on a speficic interface. The SFP Module Information
screen in Figure 4-4-4 appears.
Figure 4-4-4 SFP Module Information for Switch page screenshot
The page includes the following fields:
Object Description
 Type
Display the type of current SFP module, the possible types are:
0Base-SX
 100
 1000Base-LX
 100Base-FX
 Speed
P module, the speed value or description is get
nt vendors SFP modules might shows different
Display the spedd of current SF
from the SFP module. Differe
speed information.
 Wave Length(nm)
rent SFP module, the wavelength value is get from
the SFP module. Use this column to check if the wavelength values of two nodes
Display the wavelength of cur
are the matched while the fiber connection is failed.
 Distance(m)
, the distance value is get
from the SFP module.
Display the supports distance of current SFP module
93