User Manual

Table Of Contents
User’s Manual of WGSW-24040 / WGSW-24040R
6.5 VLAN Configuration Command
VLAN Configuration
Description:
Show VLAN configuration.
Syntax:
VLAN Configuration [<port_list>]
Parameters:
<port_list>: Port list or 'all', default: All ports
Example:
Show VLAN status of port1
WGSW-24040:/>vlan configuration 1
VLAN Configuration:
===================
Mode : IEEE 802.1Q
Port PVID IngrFilter FrameType LinkType Q-in-Q Mode Eth type
---- ---- ---------- ---------- -------- ----------- --------
1 1 Disabled All UnTag Disable N/A
VID VLAN Name Ports
---- -------------------------------- -----
1 default 1-24
VID VLAN Name Ports
---- -------------------------------- -----
VLAN forbidden table is empty
VLAV PVID
Description:
Set or show the port VLAN ID.
368