User Manual

Table Of Contents
User’s Manual of WGSW-24040 / WGSW-24040R
Configuration
Port Mode Configuration
Specify ARP Inspection is enabled on which ports. Only when both Global
Mode and Port Mode on a given port are enabled, ARP Inspection is enabled
on this given port.
Buttons
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
: Click to translate all dynamic entries to static entries.
4.12.13 ARP Inspection Static Table
This page provides Static ARP Inspection Table. The Static ARP Inspection Table screen in Figure 4-12-13 appears.
Figure 4-12-13 Static ARP Inspection Table screen page screenshot
The page includes the following fields:
Object Description
Delete
Check to delete the entry. It will be deleted during the next save.
Port
The logical port for the settings.
VLAN ID
The VLAN ID for the settings.
MAC Address
Allowed Source MAC address in ARP request packets.
IP Address
Allowed Source IP address in ARP request packets.
Buttons
: Click to add a new entry to the Static ARP Inspection table.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
281