User Manual

Table Of Contents

User’s Manual of WGSW-24040 / WGSW-24040R

Figure 4-10-3 ACE Configuration page screenshot

The page includes the following fields:

Object Description

 Ingress Port

Select the ingress port for which this ACE applies.

Any: The ACE applies to any port.

Port n: The ACE applies to this port number, where n is the number of the switch port.

 Policy Filter

Specify the policy number filter for this ACE.

Any: No policy filter is specified. (policy filter status is "don't-care".)

Specific: If you want to filter a specific policy with this ACE, choose this value. Two field

for entering an policy value and bitmask appears.

 Policy Value

When "Specific" is selected for the policy filter, you can enter a specific policy value.

The allowed range is 0 to 255.

 Policy Bitmask

When "Specific" is selected for the policy filter, you can enter a specific policy bitmask.

The allowed range is 0x0 to 0xff.

 Frame Type

Select the frame type for this ACE. These frame types are mutually exclusive.

Any: Any frame can match this ACE.

Ethernet Type: Only Ethernet Type frames can match this ACE. The IEEE 802.3

describes the value of Length/Type Field specifications to be greater than or equal to

1536 decimal (equal to 0600 hexadecimal).

ARP: Only ARP frames can match this ACE. Notice the ARP frames won't match the

ACE with ethernet type.

210