User Manual

User’s Manual of WGSW-24040 / WGSW-24040R
Figure 4-5-4 LACP Port Configuration page screenshot
The page includes the following fields:
Object Description
 Port
The switch port number.
 LACP Enabled
Controls whether LACP is enabled on this switch port. LACP will form an
aggregation when 2 or more ports are connected to the same partner. LACP can
form max 12 LLAGs per switch and 2G LAGs per stack.
 Key
The Key value incurred by the port, range 1-65535 . The Auto setting will set the
key as appropriate by the physical link speed, 10Mb = 1, 100Mb = 2, 1Gb = 3.
Using the Specific setting, a user-defined value can be entered. Ports with the
same Key value can participate in the same aggregation group, while ports with
different keys cannot.
The default setting is “Auto”
 Role
The Role shows the LACP activity status. The Active will transmit LACP packets
101