(V2) Quick Guide

5
3. Terminal Setup
Tocongure thesystem,connectaserialcable toaCOMportona PCornotebook
computerandtoDB9typeofserialportoftheManagedSwitch.
Managed Switch
PC / Workstation
with
Terminal Emulation Software
Serial Port
RS232 to RJ45 Cable
Console Port
RJ45
Figure 3-1: Managed Switch Console Connectivity
A terminalprogram, such asTera Term or PuTTY,is required to makethe software
connectiontotheManagedSwitch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
z Baud:115200
z Databits:8
z Parity:None
z Stopbits:1
z Flowcontrol:None
Figure 3-2: COM Port Conguration