(V2) Datasheet

WGSW-24040HP/WGSW-24040HP4
3
Scheduled Power Recycling
The WGSW-24040HP Series allows each of the connected PoE IP cameras or PoE
wireless access points to reboot at a specified time each week. Therefore, they will
reducethechanceofIPcameraorAPcrashresultingfrombufferoverow.
PoE Schedule for Energy Saving
Under the trend of energy saving worldwide and contributing to environmental protection,
the WGSW-24040HP Series can effectively control the power supply besides their
capability of giving high watts power. The “PoE schedule” function helps you to enable or
disable PoE power feeding for each PoE port during specified time intervals and it is a
powerful function to help SMBs or enterprises save power and money. It also increases
security by powering off PDs that should not be in use during non-business hours.
PoE Usage Monitoring
Via the power usage chart in the web management interface, the WGSW-24040HP
Series enables the administrator to monitor the status of the power usage of the
connected PDs in real time. Thus, they greatly enhance the management efficiency of
the facilities.
Solution for IPv6 Networking
By supporting IPv6/IPv4 dual stack and plenty of management functions with easy and
friendly management interfaces, the WGSW-24040HP series is the best choice for IP
surveillance, VoIP and wireless service providers to connect with the IPv6 network.
It also helps the SMB to step in the IPv6 era without having to replace the existing
network facilities, thus saving the investment budget.
–
TACACS+ login users access authentication
–
RADIUS / TACACS+ users access authentication
• Access Control List
–
IP-based Access Control List (ACL)
–
MAC-based Access Control List
• Source MAC / IP address binding
• DHCP Snoopingtolterun-trustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with
invalid MAC address to IP address binding
• IP Source GuardpreventsIPspoongattacks
• Auto DoS rule to defend DoS attack
• IPaddressaccessmanagementtopreventunauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
–
Console / Telnet Command Line Interface
–
Web switch management
–
SNMP v1, v2c, and v3 switch management
–
SSH / SSL secure access
• IPv6 IP Address / NTP / DNS management
• Built-in Trivial File Transfer Protocol (TFTP) client
• BOOTP and DHCP for IP address assignment
• System Maintenance
–
Firmware upload/download via HTTP / TFTP
–
Reset button for system reboot or reset to factory default
–
Dual Images
• DHCP Relay
• DHCP Option82
• DHCP Server
• User Privilege levels control
• NTP (Network Time Protocol)
• Link Layer Discovery Protocol (LLDP) and LLDP-MED
• Network Diagnostic
–
ICMPv6 / ICMPv4 Remote Ping
–
Cable Diagnostic technology provides the mechanism to
detect and report potential cabling issues
• SMTP / Syslog remote alarm
• Four RMON groups (history, statistics, alarms and events)
• SNMPtrapforinterfaceLinkUpandLinkDownnotication
• System Log
• PLANET Smart Discovery Utility for deployment
management
S M T W T F S
Automatically Reboot
Every Friday 23:00
PoE PT Camera
ON ON
PoE
OFF
CPU/Buffer
Load 85%
CPU/Buffer
Load 10%
Power
On
Power
On
Power
On
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
PoE
PoE PoE
PoE
Power
Off
Power
Off
Power
Off
Power
On
6 Watts 6 Watts 12 Watts 12 Watts
PoE
PoE PoE
PoE
PoE
1000Base-T UTP with PoE
Total consumption of 36 watts/hr
5PM8AM
5PM 8AM
Save 24 watts/hr during off-business hours
Total Saved = 10800 Watts/month
IPv4 Network
IPv6 Network
Application
IPv6
Stack
IPv4
Stack
Transport Layer
TELNET WEB
SSHSNMP
ICMPSSL
DHCPNTP
IPv6 Management HostIPv4 Management Host
WGSW-24040HP Series