(V2) Datasheet

WGSW-24040HP/WGSW-24040HP4
2
Convenient and Smart ONVIF Devices with Detection Feature
PLANET has newly developed an awesome feature -- ONVIF Support -- which is
specifically designed for co-operating with video IP surveillances. From the WGSW-
24040HP Series GUI, clients just need one click to search and show all of the ONVIF
devicesvianetworkapplication.Inaddition,clientscanuploadoorimagestotheswitch
series, making the deployments of surveillance and other devices easy for planning and
inspection purposes. Moreover, clients can get real-time surveillance’s information and
online/ofinestatus.TheyallowPoErebootcontrolfromtheGUI.
Built-in Unique PoE Functions for Powered Devices Management
Being the managed PoE switches for surveillance, wireless and VoIP networks, the
WGSW-24040HP Series features the following special PoE management functions:
■PDalivecheck
■Scheduledpowerrecycling
■PoEschedule
■PoEusagemonitoring
Intelligent Powered Device Alive Check
The WGSW-24040HP Series can be configured to monitor connected PD (powered
device) status in real time via ping action. Once the PD stops working and responding,
the WGSW-24040HP Series will resume the PoE port power and bring the PD back to
work. They will greatly enhance the network reliability through the PoE port resetting the
PD’s power source and reducing administrator management burden.
• Supports Spanning Tree Protocol
–
IEEE 802.1D Spanning Tree Protocol (STP)
–
IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
–
IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
–
BPDU Guard
• Supports Link Aggregation
–
802.3ad Link Aggregation Control Protocol (LACP)
–
Cisco ether-channel (static trunk)
–
Maximum 12 trunk groups, up to 4 ports per trunk group
–
Up to 32Gbps bandwidth (full duplex mode)
• Provides port mirroring (many-to-1)
• Portmirroringtomonitortheincomingoroutgoingtrafcon
a particular port
• Loop protection to avoid broadcast loops
• Compatible with Cisco Uni-directional link detection
(UDLD) that monitors a link between two switches and
blocks the ports on both ends of the link if the link fails at
any point between the two devices.
Quality of Service
• Ingress Shaper and Egress Rate Limit per port bandwidth
control
• 8 priority queues on all switch ports
• Trafcclassication
–
IEEE 802.1p CoS
–
TOS / DSCP / IP Precedence of IPv4/IPv6 packets
–
IP TCP/UDP port number
–
Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Trafcpolicingontheswitchport
• DSCP remarking
Multicast
• Supports IGMP Snooping v1, v2 and v3
• Supports MLD Snooping v1 and v2
• Querier mode support
• IGMPSnoopingportltering
• MLDSnoopingportltering
• Multicast VLAN Registration (MVR) support
Security
• Authentication
–
IEEE 802.1x Port-based / MAC-based network access
authentication
–
Built-in RADIUS client to co-operate with the RADIUS
servers
PT PoE Camera
Ping Request
Ping Request
Check alive status for 3 times
Restart PoE device if without response
Ping Echo
No Response......
PD Alive!!
Step 1
Step 3
Step 2
Step 4
ON
PoE
ON
ON
PoE
OFF
PD Status
Good!!
Alarm Notification