Quick Guide

5
3. Terminal Setup
Tocongure thesystem,connect aserial cabletoaCOM portona PCor notebook
computerandtoDB9typeofserialportoftheManagedSwitch.
Managed Switch
PC / Workstation with
Terminal Emulation Software
Serial Port
RS232 to DB39 Cable
Console Port
DB39
Figure 3-1: Managed Switch Console Connectivity
A terminalprogram, suchas Tera Term or PuTTY, isrequired to makethe software
connectiontotheManagedSwitch.
1. Run terminal program on the OS.
2.When the following screen appears, make sure that the COM port should be
conguredas:
Baud:115200
Databits:8
Parity:None
Stopbits:1
Flowcontrol:None
Figure 3-2: COM Port Conguration