WGSW-Series (V3) User Manual

User’s Manual of WGSW Series Managed Switch
340
4.6.1.9 Port Power Consumption
This page allows user to see the usage of individual PoE Port. The screen in Figure 4-6-1-8 appears.
Figure 4-6-1-8: PoE Power Consumption Screenshot
: Refreshes the Web page and the current configuration if user doesn’t save it.
4.6.1.10 LLDP PoE Neighbors
This page provides a status overview for all LLDP PoE neighbors. The displayed table contains a row for each port on which an
LLDP PoE neighbor is detected. The columns hold the following information: The screen in Figure 4-6-1-9 appears.
Figure 4-6-1-9: LLDP PoE Neighbor Screenshot
Please note that administrator has to enable LLDP port from LLDP configuration, please refer to the following example (The
screen in Figure 4-6-1-10 appears.) To enable LLDP function from port1 to port3, administrator has to plug a PD that supports
PoE LLDP function, and then administrator is going to see the PoE information of the PD from LLDP.