WGSW-Series (V3) User Manual

User’s Manual of WGSW Series Managed Switch
308
0xFFFFFFFE(bit 0 is "don't-care" bit), then SIPv6 address 2001::2 and 2001::3
are applied to this rule.
• Hop Limit
Specify the hop limit settings for this ACE.
■ zero: IPv6 frames with a hop limit field greater than zero must not be able
to match this entry.
■ non-zero: IPv6 frames with a hop limit field greater than zero must be able
to match this entry.
■ Any: Any value is allowed ("don't-care”).
 ICMP Parameters
Object Description
• ICMP Type Filter
Specify the ICMP filter for this ACE.
■ Any: No ICMP filter is specified (ICMP filter status is "don't-care").
■ Specific: If you want to filter a specific ICMP filter with this ACE, you can
enter a specific ICMP value. A field for entering an ICMP value appears.
• ICMP Type Value
When "Specific" is selected for the ICMP filter, you can enter a specific ICMP
value.
The allowed range is 0 to 255. A frame that hits this ACE matches this ICMP
value.
• ICMP Code Filter
Specify the ICMP code filter for this ACE.
■ Any: No ICMP code filter is specified (ICMP code filter status is
"don't-care").
■ Specific: If you want to filter a specific ICMP code filter with this ACE, you
can enter a specific ICMP code value. A field for entering an ICMP code
value appears.
• ICMP Code Value
When "Specific" is selected for the ICMP code filter, you can enter a specific
ICMP code value.
The allowed range is 0 to 255. A frame that hits this ACE matches this ICMP
code value.