WGSW-Series (V3) User Manual

User’s Manual of WGSW Series Managed Switch
19
 Multicast
 Supports IPv4 IGMP Snooping v1, v2 and v3
 Supports IPv6 MLD Snooping v1 and v2
 Querier mode support
 IPv4 IGMP Snooping port filtering
 IPv6 MLD Snooping port filtering
 Multicast VLAN Registration (MVR) support
 Security
 Authentication
- IEEE 802.1x Port-based / MAC-based network access authentication
- Built-in RADIUS client to co-operate with the RADIUS servers
- TACACS+ login users access authentication
- RADIUS / TACACS+ users access authentication
- Guest VLAN assigns clients to a restricted VLAN with limited services
 Access Control List
- IP-based Access Control List (ACL)
- MAC-based Access Control List
 Source MAC / IP address binding
 DHCP Snooping to filter un-trusted DHCP messages
 Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
 IP Source Guard prevents IP spoofing attacks
 Auto DoS rule to defend DoS attack
 IP address access management to prevent unauthorized intruder
 Management
 IPv4 and IPv6 dual stack management
 Switch Management Interfaces
- Console / Telnet Command Line Interface
- Web switch management
- SNMP v1, v2c, and v3 switch management
- SSH / SSL secure access
 SNMP Management
- Four RMON groups (history, statistics, alarms, and events)
- SNMP trap for interface Link Up and Link Down notification
 IPv6 IP Address / NTP / DNS management
 Built-in Trivial File Transfer Protocol (TFTP) client
 BOOTP and DHCP for IP address assignment
 System Maintenance
- Firmware upload/download via HTTP / TFTP
- Reset button for system reboot or reset to factory default
- Dual Images
 DHCP Relay
 DHCP Option82
 DHCP Server
 User Privilege levels control
 NTP (Network Time Protocol)
 Link Layer Discovery Protocol (LLDP) and LLDP-MED
 Network Diagnostic