(V3) Quick Guide

7
To check the current IP address or modify a new IP address for the Managed
Switch,pleaseusetheproceduresasfollows:
ShowthecurrentIPAddress
1.Atthe“#”prompt,enter“show ip interface brief”.
2.ThescreendisplaysthecurrentIPaddressasshowninFigure3-4.
Figure 3-4: IP Information Screen
ConguringIPAddress
3.At the “#” prompt, enter the following command and press <Enter> as shown
inFigure3-5.
WGSW-24040#congureterminal
WGSW-24040(cong)#interfacevlan1
WGSW-24040(cong-if-vlan)#ipaddress192.168.1.100255.255.255.0
Figure 3-5: Conguring IP Address Screen