(V3) Datasheet

3
WGSW-20160HP/WGSW-24040HP4
• 8 priority queues on all switch ports
• Trafcclassication
– IEEE 802.1p CoS
– TOS / DSCP / IP Precedence of IPv4/IPv6 packets
– IP TCP/UDP port number
– Typical network application
• Strict priority and Weighted Round Robin (WRR) CoS
policies
• Supports QoS and In/Out bandwidth control on each port
• Trafcpolicingontheswitchport
• DSCP remarking
Multicast
• Supports IPv4 IGMP Snooping v1, v2 and v3
• Supports IPv6 MLD Snooping v1 and v2
• Querier mode support
• IPv4IGMPSnoopingportltering
• IPv6MLDSnoopingportltering
• Multicast VLAN Registration (MVR) support
Security
• Authentication
– IEEE 802.1x Port-based/MAC-based network access
authentication
– Built-in RADIUS client to co-operate with the RADIUS
servers
– TACACS+ login users access authentication
– RADIUS/TACACS+ users access authentication
• Access Control List
– IP-based Access Control List (ACL)
– MAC-based Access Control List
• Source MAC/IP address binding
• DHCP Snoopingtolterun-trustedDHCPmessages
• Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
• IP Source Guard preventsIPspoongattacks
• IPaddressaccessmanagementtopreventunauthorized
intruder
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interfaces
– Web switch management
– Console/Telnet Command Line Interface
Scheduled Power Recycling
The WGSW-20160HP and WGSW-24040HP4 allow each of the connected PDs
to reboot at a specified time each week. Therefore, it will reduce the chance of PD
crashresultingfrombufferoverow.
SMTP/SNMP Trap Event Alert
Though most NVR or camera management software offers SMTP email alert
function, the WGSW-20160HP and WGSW-24040HP4 further provide event alert
function to help to diagnose the abnormal device owing to whether or not there is a
break of the network connection, loss of PoE power or the rebooting response by the
PD Alive Check process.
S M T W T F S
Automatically Reboot
Every Friday 23:00
PoE PT Camera
ON ON
PoE
OFF
CPU/Buffer
Load 85%
CPU/Buffer
Load 10%
Convenient and Smart ONVIF Devices with Detection Feature
PLANET has newly developed an awesome feature -- ONVIF Support -- which is
specifically designed for cooperating with video IP surveillances. From the WGSW-
20160HP and WGSW-24040HP4 GUI, you just need one click to search and show
all of the ONVIF devices via network application. In addition, you can upload floor
images to the switch and remotely monitor what is going on in the production line.
Moreover, you can get real-time surveillance’s information and online/offline status,
and can have PoE reboot control from GUI.