User Manual

User’s Manual of WGSD / WGSW Layer 2+ Series
WGSW-24040HP4 LED Indication
Figure 2-13: WGSW-24040HP4 series LED on Front Panel
System
LED Color Function
PWR Green
Lights to indicate that the Switch has power.
Alert
LED Color Function
FAN1 Green Lights to indicate FAN1 failure.
FAN2 Green Lights to indicate FAN2 failure.
FAN3 Green Lights to indicate FAN3 failure. (For WGSW-24040HP4 only)
PWR Green Lights to indicate Power failure.
Per 10/100/1000Mbps port with PoE interfaces
LED Color Function
Lights:
To indicate the link through that port is successfully established at
10/100/1000Mbps.
LNK/ACT Green
Blinks:
To indicate that the Switch is actively sending or receiving data over that port.
Lights:
To indicate the port is providing 56V DC in-line power.
PoE In-Use Orange
Off:
To indicate the connected device is not a PoE Powered Device (PD).
Per 100/1000Mbps SFP Combo Interface (Port -21 to Port-24)
LED Color Function
Lights.
To indicate the port is successfully established at 1000Mbps.
1000
LNK/ACT
Green
Blinks:
To indicate that the Switch is actively sending or receiving data over that port.
Lights:
To indicate the port is successfully established at 100Mbps.
100
LNK/ACT
Orange
Blinks:
To indicate that the Switch is actively sending or receiving data over that port.
34