User Manual

User’s Manual of WGSD / WGSW Layer 2+ Series
WGSW-20160HP LED indication
Figure 2-10 LED Panel of WGSW-20160HP
System
LED Color Function
PWR Green Lights to indicate that the Switch has power.
SYS Green Lights to indicate the system is working.
Alert
LED Color Function
FAN1 Green Lights to indicate that the FAN1 failure.
FAN2 Green Lights to indicate that the FAN2 failure.
Per 10/100/1000Mbps port with PoE interfaces (Port 1 to Port 16)
LED Color Function
Lights:
To indicate the link through that port is successfully established at
10/100/1000Mbps.
LNK/ACT Green
Blinks:
To indicate that the Switch is actively sending or receiving data over that port.
Lights:
To indicate the port is providing 56V DC in-line power.
PoE In-Use Orange
Off:
To indicate the connected device is not a PoE Powered Device (PD).
Per 10/100/1000BASE-T Combo Port (Port 17 to Port 20)
LED Color Function
Lights:
To indicate the link through that port is successfully established at 1000Mbps.
1000
LNK/ACT
Green
Blinks:
To indicate that the Switch is actively sending or receiving data over that port.
Lights:
To indicate the link through that port is successfully established at 10Mbps or
100Mbps.
10 / 100
LNK / ACT
Orange
Blinks:
To indicate that the Switch is actively sending or receiving data over that port.
Per 100/1000Mbps SFP Combo Interface (Port 17 to Port 20)
LED Color Function
Lights.
To indicate the port is successfully established at 1000Mbps.
1000
LNK/ACT
Green
Blinks:
To indicate that the Switch is actively sending or receiving data over that port.
Lights:
To indicate the port is successfully established at 100Mbps.
100
LNK/ACT
Orange
Blinks:
To indicate that the Switch is actively sending or receiving data over that port.
32