Datasheet

WGSD-10020HP
3
Security
Authentication
IEEE 802.1x Port-based / MAC-based network access
authentication
Built-in RADIUS client to co-operate with the RADIUS
servers
TACACS+ login users access authentication
RADIUS / TACACS+ users access authentication
Access Control List
IPv4 / IPv6 IP-based ACL
MAC-based ACL
Source MAC / IP address binding
Port Security for Source MAC address entries ltering
• DHCPsnoopingto lter distrusted DHCP messages
• DynamicARPInspection discards ARP packets with
invalid MAC address to IP address binding
• IPSourceGuard prevents IP spoong attacks
Auto DoS rule to defend DoS attack
IP address access management to prevent unauthorized
intruder
Management
IPv4 and IPv6 dual stack management
Switch Management Interfaces
Console / Telnet Command Line Interface
Web switch management
SNMP v1, v2c, and v3 switch management
SSH / SSL secure access
User Privilege levels control
System Maintenance
Firmware upload/download via HTTP / TFTP
Conguration upload / download through Web interface
Dual Images
Reset button for system reboot or reset to factory default
Built-in Trivial File Transfer Protocol (TFTP) client
Four RMON groups (history, statistics, alarms, and events)
IPv6 / NTP / DNS management and ICMPv6
BOOTP and DHCP for IP address assignment
DHCP Relay
DHCP Option82
NTP (Network Time Protocol)
Link Layer Discovery Protocol (LLDP) Protocol and LLDP-
MED
Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
PLANET Smart Discovery Utility for deploy management
Robust Layer 2 Features
The WGSD-10020HP can be programmed for advanced switch management
function, such as dynamic port link aggregation, Q-in-QVLAN,Multiple
SpanningTreeProtocol(MSTP), Layer 2/4 QoS, bandwidth control and IGMP/
MLDsnooping. The WGSD-10020HP allows the operation of a high-speed trunk
combining multiple ports.It enables you to congure up to 5 ports as a trunk group
(a maximum of 5 trunk groups are available), and supports connection fail-over as
well.
Powerful Security
The WGSD-10020HP offers comprehensive layer 2 to layer 4 access control list
(ACL) for enforcing security to the edge. It can be used to restrict to network
access by denying packets based on source and destination IP address, TCP/UDP
port number or dened typical network applications. Its protection mechanism also
comprises 802.1x port-based and MAC-based user and device authentication.
Enhanced Security and Traffic Control
The WGSD-10020HP also provides DHCP Snooping, IP Source Guard and
Dynamic ARP Inspection functions to prevent IP snooping from attack and discard
ARP packets with invalid MAC address. The network administrator can now
construct highly-secured corporate networks with considerably less time and effort
than before.
User-friendly Secure Management
For efcient management, the WGSD-10020HP managed switch series is equipped
with console, Web and SNMP management interfaces. With the built-in web-
based management interface, the WGSD-10020HP offers an easy-to-use, platform
independent management and conguration facility. The WGSD-10020HP supports
SNMP and it can be managed via any management software based on standard of
SNMP v1 and v2 protocol. For reducing product learning time, the WGSD-10020HP
offers Cisco-like command via Telnet or console port and customer doesn’t need
to learn new command from these switches. Moreover, the WGSD-10020HP offers
remote secure management by supporting SSH, SSL and SNMPv3 connection
which can be encrypted the packet content at each session.
Flexible and Extendable Solution
The two mini-GBIC SFP slots built in the WGSD-10020HP support dual speed as
it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable)
fiber-optic modules, meaning the administrator can flexibly choose the suitable
SFP transceiver according to not only the transmission distance, but also the
transmission speed required. The distance can be extended from 550 meters
to 2km (multi-mode fiber) and up to above 10/20/30/40/50/70/120 kilometers
(single-mode fiber or WDM fiber). They are well suited for applications within the
enterprise data centers and distributions.
Intelligent SFP Diagnosis Mechanism
The WGSD-10020HP supports SFP-DDM (Digital Diagnostic Monitor) function that
greatly helps network administrator to easily monitor real-time parameters of the
SFP transceivers, such as optical output power, optical input power, temperature,
laser bias current, and transceiver supply voltage.
LACPMSTP
Q-in-Q LLDPQoS
MLD
IGMP
L2/L4
Managed Switch
L2/L4
Managed Switch