Datasheet

ManualsBrandsPLANET Technology ManualsPoE switches8-Port 10/100/1000Mbps + 2 100/1000X SFP Managed 802.3at PoE Switch (150W)

Data Sheet

Key Features

WGSD-10020HP

L2+ 8-Port 10/100/1000T + 2-Port 100/1000X SFP

Managed 802.3at PoE Switch

Centralized Power Management for Gigabit Ethernet Networking

To fulfill the demand of higher power required PoE network applications with

Gigabit speed transmission, PLANET has launched a new desktop 13-inch size

Gigabit Managed Switch, WGSD-10020HP, which features high-performance

Gigabit IEEE 802.3at PoE Plus on all copper ports. A maximum of 30 watts

is available on each Gigabit copper port of the WGSD-10020HP for powering

each PD, with a maximum PoE delivery of 150 watts for all PoE ports in

order to satisfy the increasing needs of power consumption by PDs. Providing

Gigabit throughput and high power supply, the WGSD-10020HP optimizes the

installation and power management of network devices such as 11n wireless

access points (APs) with Gigabit PoE LAN port, security PTZ / Speed Dome

network video camera, color touch-screen PoE video phones, thin-clients and

more.

Built-in Unique PoE Functions for Powered Devices Management

As a managed PoE Switch for surveillance, wireless and VoIP network, the

WGSD-10020HP features special PoE management functions:

■ PD Alive Check

■ Scheduled Power Recycling

■ SMTP/SNMP Trap Event Alert

■ PoE Schedule

Physical Port

• 8-Port10/100/1000BASE-TGigabit Ethernet RJ-45 with

IEEE802.3af/802.3atPoE Injector

• 2100/1000BASE-Xmini-GBIC/SFP slots, SFP type auto

detection

• RS-232 DB9 console interface for basic management and

setup

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus

• Backward compatible with IEEE 802.3af Power over

Ethernet

• Up to 8 ports for IEEE 802.3af / at devices powered

• Supports PoE power up to 30.8 watts for each PoE port

• Auto detects powered device (PD)

• Circuit protection prevents power interference between

ports

• Remote power feeding up to 100m

• PoE Management

–

Total PoE power budget control

–

Per port PoE function enable/disable

–

PoE Port Power feeding priority

–

Per PoE port power limitation

–

PD classication detection

–

PD alive check

Layer 2 Features

• Prevents packet loss with back pressure (half-duplex) and

IEEE 802.3x pause frame ow control (full-duplex)

• High performance of Store-and-Forward architecture and

runt/CRC ltering eliminates erroneous packets to optimize

the network bandwidth

• Storm Control support

–

Broadcast / Multicast / Unicast / Unknown-unicast

• Supports VLAN

–

IEEE 802.1Q tagged VLAN

–

Up to 255 VLANs groups, out of 4095 VLAN IDs

–

Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)

–

Private VLAN Edge (PVE)

–

Protocol-based VLAN

–

MAC-based VLAN

Reset Button 2 x 100/1000Base-X SFP SlotAlarm / PoE / PWR LED

8 x Gigabit 802.3at PoE+ Port

Summary of content (7 pages)

PAGE 1
WGSD-10020HP L2+ 8-Port 10/100/1000T + 2-Port 100/1000X SFP Managed 802.3at PoE Switch Physical Port Key Features • 8-Port 10/100/1000BASE-T Gigabit Ethernet RJ-45 with IEEE 802.3af / 802.
PAGE 2
WGSD-10020HP Intelligent Powered Device Alive Check The WGSD-10020HP PoE Gigabit Managed Switch can be configured to monitor connected PD (Powered Device) status in real-time via ping action. Once the PD stops working and responding, the WGSD-10020HP will recycle the PoE port power and bring the PD back to work. It will greatly enhance the network reliability through the PoE port resetting the PD’s power source and reduce administrator management burden.
PAGE 3
WGSD-10020HP Robust Layer 2 Features Security The WGSD-10020HP can be programmed for advanced switch management • Authentication function, such as dynamic port link aggregation, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Layer 2/4 QoS, bandwidth control and IGMP/ MLD snooping. The WGSD-10020HP allows the operation of a high-speed trunk combining multiple ports.
PAGE 4
WGSD-10020HP Applications High Power IP Surveillance and Wireless LAN Service in Public Transportation Applying the capability of IEEE 802.3at Power over Ethernet standard, the WGSD-10020HP can directly connect with any IEEE 802.3at end-node like PTZ (Pan, Tilt & Zoom) network cameras, speed dome IP cameras, color touch-screen Voice over IP (VoIP) telephones, and multi-channel wireless LAN access points.
PAGE 5
WGSD-10020HP Specifications WGSD-10020HP Product Hardware Specifications Copper Ports 8 10/ 100/1000BASE-T RJ45 Auto-MDI/MDI-X ports SFP/mini-GBIC Slots 2 1000BASE-SX/LX/BX SFP interfaces (Port-9 and Port-10) Supports 100/1000Mbps dual mode and DDM Console Port 1 x RS-232 DB9 serial port (115200, 8, N, 1) Switch Architecture Store-and-Forward Switch Fabric 20Gbps / non-blocking Switch Throughput 14.
PAGE 6
WGSD-10020HP IGMP Snooping IGMP (v1/v2/v3) snooping, up to 255 multicast groups IGMP Querier mode support MLD Snooping MLD (v1/v2) snooping, up to 255 multicast groups MLD Querier mode support Access Control List IP-based ACL / MAC-based ACL Up to 256 entries Bandwidth Control Per port bandwidth control Ingress: 100Kbps~1000Mbps Egress: 100Kbps~1000Mbps Layer 3 Functions IP Interfaces Max. 8 VLAN interfaces Routing Table Max.
PAGE 7
WGSD-10020HP Ordering Information WGSD-10020HP L2+ 8-Port 10/100/1000T + 2 100/1000X SFP Managed 802.3at PoE Switch Related Products WGSD-10020 L2+ 8-Port 10/100/1000T + 2 100/1000X SFP Managed Switch WGSW-20160HP L2+ 16-Port 10/100/1000T 802.3at PoE + 4-Port Gigabit TP/SFP Combo Managed Switch (230W) WGSW-24040HP L2+ 24-Port 10/100/1000T 802.3at PoE with 4-Port Shared SFP Managed Switch (220W) WGSW-24040HP4 L2+ 24-Port 10/100/1000T 802.