User's Manual

- 9 -
- 10 -
- 11 -
- 12 - - 13 -
Step 2-2: Or the switch, shown in the picture below, can be hung
on the wall by screwing the two screws leaving a space
of 2mm apart after the anchors are hammered in.
2mm
M4 Screw
PoE+
3 421
7 865
Uplink
60W
PoE Usage
45W
30W
15W
PWR
ACTLNK
PoE-in-Use
ACTLNK
WGS-814HP
PoE+
Magnet Mounting
DC Input Range
48-56V
, 1.5A max.
Industrial 8-Port Gigabit
Ethernet Switch with 4-Port PoE+
Standard
VLAN
Extend
3.2 DIN-rail Mounting Installation
The DIN-rail kit is included in the Wall-mount Gigabit Switch
package. To hang up the Wall-mount Gigabit Switch, follow the
steps below:
Step 1: Screw the DIN-rail bracket on the Wall-mount Gigabit
Switch.
4. Customer Support
Thank you for purchasing PLANET products. You can browse our
online FAQ resource and User’s Manual on PLANET Web site rst
to check if it could solve your issue. If you need more support
information, please contact PLANET switch support team.
PLANET online FAQs:
https://www.planet.com.tw/en/support/faq
Switch support team mail address:
support @planet.com.tw
Copyright © PLANET Technology Corp. 2020.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp. All
other trademarks belong to their respective owners.
Step 2: Lightly press the bottom of DIN-rail bracket into the
track.
Step 3: Check whether the DIN-rail bracket is tightly on the track.
3 421
7 865
Data+ Power
Data
120
PoE Power
Usage (W)
90
60
30
PWR
8-Port Gigabit Ethernet Switch
with 4-Port PoE+
ACTLNK
1000
ACTLNK
PoE In-Use
1
Push
2
Click
3 421
7 865
Data+ Power
Data
120W
PoE Usage
90W
60W
30W
PWR
ACTLNK
1000
ACTLNK
PoE-in-Use
Industrial 8-Port Gigabit Ethernet
Switch with 4-Port PoE+
WGS-804HP
PoE
Magnet Mounting
V+
Ground
DC Input Range
48-56V
, 3A max.
PoE+
3 421
7 865
Uplink
60W
PoE Usage
45W
30W
15W
PWR
ACTLNK
PoE-in-Use
ACTLNK
WGS-814HP
PoE+
Magnet Mounting
DC Input Range
48-56V
, 1.5A max.
Industrial 8-Port Gigabit
Ethernet Switch with 4-Port PoE+
Standard
VLAN
Extend
PoE+
3 421
7 865
Uplink
60W
PoE Usage
45W
30W
15W
PWR
ACTLNK
PoE-in-Use
ACTLNK
WGS-814HP
PoE+
Magnet Mounting
DC Input Range
48-56V
, 1.5A max.
Industrial 8-Port Gigabit
Ethernet Switch with 4-Port PoE+
Standard
VLAN
Extend
3.3 Magnet Installation
To install the Wall-mount Gigabit Switch on a magnetic surface,
simply follow the following diagram:
PoE+
3 421
7 865
Uplink
60W
PoE Usage
45W
30W
15W
PWR
ACTLNK
PoE-in-Use
ACTLNK
WGS-814HP
PoE+
Magnet Mounting
DC Input Range
48-56V
, 1.5A max.
Industrial 8-Port Gigabit
Ethernet Switch with 4-Port PoE+
Standard
VLAN
Extend
Appendix: Product Specications
Model WGS-814HP WGS-818HP
Hardware Specications
Network
Connector
8-port RJ45 for 10/100/1000BASE-T
Auto-negotiation and auto MDI/MDI-X
PoE Inject Port 4 8
Power
Requirements
48~56V DC, 1.5A max. 48~56V DC, 3A max.
Power
Consumption
70 watts/239 BTU 137 watts/467 BTU
ESD Protection 4KV DC
Surge Protection 6KV DC
DIP Switch
Selectable operation mode
Standard/VLAN/Extend
Enclosure IP30 metal
Dimensions 148 x 24.2 x 134 mm (W x D x H)
Weight 472 g 474 g
Switch Specications
MAC Address
Table
4K MAC address table with auto learning
function
Data Buer 64Kbytes
Switch Fabric 16Gbps
Switch Throughput 11.9Mpps@64bytes
Flow Control
Back pressure for half duplex.
IEEE 802.3x pause frame for full duplex
Power over Ethernet
PoE Standard
IEEE 802.3at Power over Ethernet Plus PSE
Backward compatible with IEEE 802.3af PoE
PoE Type End-span PSE
Power Pin
Assignment
1/2(+), 3/6(-)
PoE Power Output Per port 52V~54V DC, 30 watts (max.)
PoE Power Budget 60 watts 120 watts
Standard Conformance
Standard
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Flow Control
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Ecient Ethernet (EEE)
Regulatory
Compliance
FCC Part 15 Class A, CE
Environment
Operating
Temperature: -20 ~ 60 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage
Temperature: -20 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)