User's Manual

- 9 -
- 10 -
- 11 -
- 12 - - 13 -
User’s Manual
www.PL ANET.com.tw
材質:100P特銅紙,水性光
尺寸:105x148mm(A6),A3三折單張彩色
Energy Saving Note of the Device
This power required device does not support Standby mode operation. For energy savings, please remove the DC plug or slide the hardware-based Power Switch
to the OFF position to disconnect the device from the power circuit. Without removing the DC plug from or switching off the device, the device will still consume
power from the power source. In view of Saving the Energy and reducing the unnecessary power consumption, it is strongly suggested to power off or to remove
the DC plug from the device if this device is not intended to be active.
PLANET Technology Corp.
2350-AW1010-000 10F., No. 96, Minquan Rd., Xindian Dist., New Taipei City 231, Taiwan
Warning:
This device is compliant with Class A of CISPR 32.
In a residential environment this device may cause radio interference.
Industrial 8-Port 10/100/1000T Wall-mounted
Gigabit Ethernet Switch
►
WGS-810
Step 2: Lightly press the bottom of DIN-rail bracket into the
track.
Step 3: Check whether the DIN-rail bracket is tightly on the track.
3 421
7 865
Data+ Power
Data
120
PoE Power
Usage (W)
90
60
30
PWR
8-Port Gigabit Ethernet Switch
with 4-Port PoE+
ACTLNK
1000
ACTLNK
PoE In-Use
1
Push
2
Click
3 421
7 865
Data+ Power
Data
120W
PoE Usage
90W
60W
30W
PWR
ACTLNK
1000
ACTLNK
PoE-in-Use
Industrial 8-Port Gigabit Ethernet
Switch with 4-Port PoE+
WGS-804HP
PoE
Magnet Mounting
V+
Ground
DC Input Range
48-56V
, 3A max.
PoE+
3 421
7 865
Uplink
60W
PoE Usage
45W
30W
15W
PWR
ACTLNK
PoE-in-Use
ACTLNK
WGS-814HP
PoE+
Magnet Mounting
DC Input Range
48-56V
, 1.5A max.
Industrial 8-Port Gigabit
Ethernet Switch with 4-Port PoE+
Standard
VLAN
Extend
PoE+
3 421
7 865
Uplink
60W
PoE Usage
45W
30W
15W
PWR
ACTLNK
PoE-in-Use
ACTLNK
WGS-814HP
PoE+
Magnet Mounting
DC Input Range
48-56V
, 1.5A max.
Industrial 8-Port Gigabit
Ethernet Switch with 4-Port PoE+
Standard
VLAN
Extend
3.3 Magnet Installation
To install the Wall-mount Gigabit Switch on a magnetic surface,
simply follow the following diagram:
PoE+
3 421
7 865
Uplink
60W
PoE Usage
45W
30W
15W
PWR
ACTLNK
PoE-in-Use
ACTLNK
WGS-814HP
PoE+
Magnet Mounting
DC Input Range
48-56V
, 1.5A max.
Industrial 8-Port Gigabit
Ethernet Switch with 4-Port PoE+
Standard
VLAN
Extend
Appendix: Product Specications
Model WGS-810
Hardware Specications
Network
Connector
8-port RJ45 for 10/100/1000BASE-T
Auto-negotiation and auto MDI/MDI-X
Power
Requirements
12V DC, 1A max.
Power
Consumption
3 watts/10 BTU
ESD Protection 4KV DC
Surge Protection 6KV DC
DIP Switch
Selectable operation mode
- Standard/VLAN/Extend
Enclosure IP30 metal
Dimensions 148 x 24.2 x 134 mm (W x D x H)
Weight 446 g
Switch Specications
MAC Address
Table
4K MAC address table with auto learning
function
Data Buer 64Kbytes
Switch Fabric 16Gbps
Switch Throughput 11.9Mpps@64bytes
Flow Control
Back pressure for half duplex.
IEEE 802.3x pause frame for full duplex
4. Customer Support
Thank you for purchasing PLANET products. You can browse our
online FAQ resource and User’s Manual on PLANET Web site rst
to check if it could solve your issue. If you need more support
information, please contact PLANET switch support team.
PLANET online FAQs:
https://www.planet.com.tw/en/support/faq
Switch support team mail address:
support @planet.com.tw
Copyright © PLANET Technology Corp. 2020.
Contents are subject to revision without prior notice.
PLANET is a registered trademark of PLANET Technology Corp.
All other trademarks belong to their respective owners.
Standard Conformance
Standard
Compliance
IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3ab Gigabit Ethernet
IEEE 802.3x Flow Control
IEEE 802.3az Energy Ecient Ethernet (EEE)
Regulatory
Compliance
FCC Part 15 Class A, CE
Environment
Operating
Temperature: -20 ~ 60 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage
Temperature: -20 ~ 70 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)