WGS-5225-Series User Manual

User’s Manual
99
Figure 4-4-4: SFP Module Information for Switch Page Screenshot
The Page includes the following fields:
Object Description
• Type
Display the type of current SFP module; the possible types are:
 1000BASE-SX
 1000BASE-LX
 100BASE-FX
• Speed
Display the speed of current SFP module; the speed value or description is
obtained from the SFP module. Different vendors SFP modules might show
different speed information.
• Wave Length(nm)
Display the wavelength of current SFP module; the wavelength value is obtained
from the SFP module. Use this column to check if the wavelength values of two
nodes match while the fiber connection fails.
• Distance(m)
Display the support distance of current SFP module; the distance value is
obtained from the SFP module.
• Temperature(C)
– SFP DDM Module Only
Display the temperature of current SFP DDM module; the temperature value is
gotten from the SFP DDM module.
• Voltage(V)
– SFP DDM Module Only
Display the voltage of current SFP DDM module; the voltage value is gotten from
the SFP DDM module.
• Current(mA)
– SFP DDM Module Only
Display the ampere of current SFP DDM module; the ampere value is gotten
from the SFP DDM module.
• TX power(dBm)
– SFP DDM Module Only
Display the TX power of current SFP DDM module; the TX power value is gotten
from the SFP DDM module.
• RX power(dBm)
– SFP DDM Module Only
Display the RX power of current SFP DDM module; the RX power value is gotten
from the SFP DDM module.
Buttons
SFP Monitor Event Alert: send trap
Warning Temperature: degrees C