WGS-5225-Series User Manual

Table Of Contents
Users Manual
47
4. WEB CONFIGURATION
This section introduces the configuration and functions of the Web-based management.
About Web-based Management
The Wall-mount Managed Switch offers management features that allow users to manage the Wall-mount Managed Switch
from anywhere on the network through a standard browser such as Microsoft Internet Explorer.
The Web-based Management supports Internet Explorer 7.0. It is based on Java Applets with an aim to reducing network
bandwidth consumption, enhancing access speed and presenting an easy viewing screen.
By default, IE7
.0 or later version does not allow Java Applets to open sockets. The user has to
explicitly modify the browser setting to enable Java Applets to use network ports.
The Wall-mount Managed Switch can be configured through an Ethernet connection, making sure the manager PC must be set
on same the IP subnet address with the Wall-mount Managed Switch.
For example, the default IP address of the Wall-mount Managed Switch is 192.168.0.100, then the manager PC should be set
at 192.168.0.x (where x is a number between 1 and 254, except 100), and the default subnet mask is 255.255.255.0.
If you have changed the default IP address of the Wall-mount Managed Switch to 192.168.1.1 with subnet mask
255.255.255.0 via console, then the manager PC should be set at 192.168.1.x (where x is a number between 2 and 254) to do
the relative configuration on manager PC.
Figure 4-1-1: Web Management