WGS-5225-Series User Manual

Table Of Contents
Users Manual
269
The granularity of this measurement is
100 ms. A value of 0 ms indicates that
there hasn't been round-trip
communication with the server yet.
Buttons
Auto-refresh : Check this box to refresh the Page automatically. Automatic refresh occurs every 3 seconds.
: Click to refresh the Page immediately.
: Clears the counters for the selected server. The "Pending Requests" counter will not be cleared by this
operation.
4.11.10 Windows Platform RADIUS Server Configuration
Setup the RADIUS server and assign the client IP address to the Wall-mount Managed Switch. In this case, field in the
default IP Address of the Wall-mount Managed Switch with 192.168.0.100. And also make sure the shared secret key is as
same as the one you had set at the Wall-mount Managed Switch’s 802.1x system configuration 12345678 at this case.
1. Configure the IP Address of remote RADIUS server and secret key.
Figure 4-11-11: RADIUS Server Configuration Screenshot