WGS-5225-Series Quick Guide

15
Figure 6-3: Conguring IP Address Screen
4.Repeatstep1tocheckiftheIPaddresshaschanged.
6.2 StoringtheCurrentSwitchConguration
Atthe“#”prompt,enterthefollowingcommandandpress<Enter>.
# copy running-cong startup-cong
Figure 6-4: Saving Current Conguration Command Screen
If the IP is successfully congured, the Wall-mount Managed Switch will apply the
new IP address setting immediately. You can access the Webinterface of the Wall-
mountManagedSwitchthroughthenewIPaddress.
Note
If you are not familiar with the console command or the related
parameter, enter “help” anytime in console to get the help
description.