Datasheet
WGS-4215-8T2S
3
– Telnet Command Line Interface
– SNMP v1 and v2c switch management
– SSHv2, TLSv1.2 and SNMP v3 secure access
• SNMP Management
– SNMP trap for interface Link Up and Link Down notication
– Four RMON groups (history, statistics, alarms and events)
• User privilege levels control
• Built-in Trivial File Transfer Protocol (TFTP) client
• Static and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP / TFTP
– Conguration upload/download through HTTP / TFTP
– Dual images
– Hardware reset button for system reboot or reset to factory
default
• SNTP Network Time Protocol
• Network Diagnostic
– Cable diagnostics
– ICMPv6/ICMPv4 Remote Ping
• Link Layer Discovery Protocol (LLDP) Protocol and LLDP-
MED
• Event message logging to remote Syslog server
• Four RMON groups (history, statistics, alarms and events)
• PLANET Smart Discovery Utility for deployment management
• PLANET NMS system and CloudViewer for deployment
management
Dual Power Input for High Availability Network System
The WGS-4215-8T2S features a strong dual power input system (12V~48V DC or 24V
AC) incorporated into customer’s automation network to enhance system reliability and
uptime. In the example below, when the 3-pin terminal block fails to work, the hardware
failover function will be activated automatically to keep powering the WGS-4215-8T2S
via the DC plug power alternatively without any loss of operation.
DC
Power Line (DC)
1000BASE-T UTP
IP Camera
AP
PC
Router
12V~48V DC
12V~48V DC
12V~48V DC
12V~48V DC
DC DC
Power
IP Camera
AP
PC
Router
DC DC
Power
Environmentally Hardened Design
With IP30, flat but rugged metal housing protection, the WGS-4215-8T2S provides a
high level of immunity against electromagnetic interference and heavy electrical surges
which are usually found on plant oors or in curb side trafc control cabinets without air
conditioner. Being able to operate under the temperature range from -40 to 75 degrees
C, the WGS-4215-8T2S can be placed in almost any difcult environment.