Datasheet

WGS-4215-8T2S
2
Supports Link Aggregation
IEEE 802.3ad Link Aggregation Control Protocol (LACP)
Cisco ether-channel (static trunk)
Maximum 4 trunk groups, up to 8 ports per trunk group
Provides port mirror (many-to-1)
Loop protection to avoid broadcast loops
Supports ERPS (Ethernet Ring Protection Switching)
Quality of Service
Ingress/Egress Rate Limit per port bandwidth control
Trafc classication
IEEE 802.1p CoS
TOS/DSCP/IP precedence of IPv4/IPv6 packets
Strict priority and Weighted Round Robin (WRR) CoS
policies
Multicast
Supports IPv4 IGMP snooping v2 and v3
Supports IPv6 MLD snooping v1, v2
IGMP querier mode support
IGMP snooping port ltering
MLD snooping port ltering
Security
Storm Control support
Broadcast/Unknown unicast/Unknown multicast
Authentication
IEEE 802.1X port-based network access authentication
Built-in RADIUS client to co-operate with the RADIUS
servers
DHCP Option 82
RADIUS/TACACS+ authentication
Access Control List
IPv4/IPv6 IP-based ACL
IPv4/IPv6 IP-based ACE
MAC-based ACL
MAC-based ACE
MAC Security
Static MAC
MAC ltering
Port security for source MAC address entries ltering
DHCP snooping to lter distrusted DHCP messages
Dynamic ARP inspection discards ARP packets with invalid
MAC address to IP address binding
IP source guard prevents IP spoong attacks
DoS attack prevention
Management
IPv4 and IPv6 dual stack management
Switch Management Interface
Web switch management
Snooping, IP Source Guard, Dynamic ARP Inspection, 802.1x port-based network
access control, RADIUS and TACACS+ user accounts management, SNMPv3
authentication, and so on to complement it as an all-security solution.
Redundant Ring, Fast Recovery for Critical Network Applications
The WGS-4215-8T2S supports redundant ring technology and features strong, rapid
self-recovery capability to prevent interruptions and external intrusions. It incorporates
advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology, and
Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system
reliability and uptime in various environments.
WGS-4215-8T2S
WGS-4215-8T2S
Managed
Switch
ERPS Ring for Video Transmission Redundancy
1000BASE-T UTP
Network Video
Recorder
Traffic Control Center
ERPS Ring
1000
1000
1000
1000
Outdoor
IP Camera
Outdoor
IP Camera
Outdoor
IP Camera
1000BASE-SX/LX Fiber Optic
1000
Innovative Wall-mount Installation
The WGS-4215-8T2S is specially designed to be installed in a narrow environment,
such as wall enclosure. The compact, flat and wall-mounted design fits easily in any
space-limited location. It adopts the user-friendly “Front Access” design, making the
installing, cable wiring, LED monitoring and maintenance of the WGS-4215-8T2S placed
in an enclosure very convenient for technicians. The WGS-4215-8T2S can be installed
by xed wall mounting, magnetic wall mounting or DIN rail, thereby making its usability
more exible.