Datasheet

ManualsBrandsPLANET Technology ManualsDIN-rail Managed Ethernet SwitchesIndustrial 8-Port 10/100/1000T + 2-Port 100/1000X SFP Wall-mount Managed Switch (-40~75 degrees C)

WGS-4215-8T2S

Industrial 8-Port 10/100/1000T + 2-Port 100/1000X SFP

Wall-mount Managed Switch

Easily-deployed and Expanded Network

Designed to be installed in a wall enclosure or simply mounted on a wall at any

convenient location, PLANET WGS-4215-8T2S, an innovative, Industrial 8-port

10/100/1000T + 2-port 100/1000X SFP Wall-mount Managed Switch, offers IPv6/

IPv4 dual stack management, intelligent Layer 2 management functions, and user-

friendly interface. The WGS-4215-8T2S is able to operate reliably, stably and quietly in

any environment without affecting its performance. Featuring ultra networking speed and

operating temperature ranging from -40 to 75 degrees C in a compact but rugged IP30

metal housing, the WGS-4215-8T2S is an ideal solution to meeting the demand for the

following network applications:

■ Building/Home automation network

■ Internet of things (IoT)

■ IP surveillance

■ Wireless LAN

Physical Port

• 8-port 10/100/1000BASE-T Gigabit RJ45 copper

• 2 100/1000BASE-X mini-GBIC/SFP slots

Industrial Case and Installation

• Compact size, wall-mounted, magnetic wall mount or DIN-rail

design

• IP30 metal case

• Supports -40 to 75 degrees C operating temperature

• Supports EFT protection of 6KV DC for power line

• Supports ESD 6KV DC Ethernet protection

• Redundant power design

– 12V~48V DC/24V AC terminal block/12V~48V DC jack

power input

– 12V~48V DC input range for booting with reverse polarity

protection

Switching

• Hardware based 10/100Mbps, half/full duplex and 1000Mbps

full duplex mode, ow control and auto-negotiation and auto

MDI/MDI-X

• Features Store-and-Forward mode with wire-speed ltering

and forwarding rates

• IEEE 802.3x ow control for full duplex operation and back

pressure for half duplex operation

• 8K MAC address table size

• 9K iumbo frame

• Automatic address learning and address aging

• Supports CSMA/CD protocol

Layer 2 Features

• Supports VLAN

– IEEE 802.1Q tagged VLAN

– Provides bridging (VLAN Q-in-Q, IEEE 802.1ad) support

– Protocol VLAN

– Voice VLAN

– Private VLAN (Protected port)

– Management VLAN

– GVRP

• Supports Spanning Tree Protocol

– STP (Spanning Tree Protocol)

– RSTP (Rapid Spanning Tree Protocol)

– MSTP (Multiple Spanning Tree Protocol)

– STP BPDU Guard, BPDU Filtering and BPDU Forwarding

PWR

SFP

ACTLNK

1000

10/100

ACTLNK

1000

100

3 421

7 865

V+

Ground

SFP

9 10

Industrial 8-Port 10/100/1000T +

2-Port 100/1000X SFP Managed Switch

WGS-4215-8T2S

ManagedFiber Magnet Mounting

DC Input: 12-48V

, 1A max.

AC Input: 24~, 1A max.

10/100/1000BASE-T RJ45 Port

10/100/1000BASE-T RJ45 Port100/1000X SFP Slot

Power LED

100/1000X SFP

LNK/ACT Status

DC Jack

V+

Ground

DC Input: 12-48V

, 1A max.

AC Input: 24~, 1A max.

3-pin Terminal Block

Cybersecurity Network Solution to Minimize Security Risks

The WGS-4215-8T2S supports SSHv2 and TLS protocols to provide strong protection

against advanced threats. It includes a range of cybersecurity features such as DHCP

Summary of content (11 pages)

PAGE 1
WGS-4215-8T2S Industrial 8-Port 10/100/1000T + 2-Port 100/1000X SFP Wall-mount Managed Switch Physical Port • 8-port 10/100/1000BASE-T Gigabit RJ45 copper • 2 100/1000BASE-X mini-GBIC/SFP slots Industrial Case and Installation • Compact size, wall-mounted, magnetic wall mount or DIN-rail design • IP30 metal case • Supports -40 to 75 degrees C operating temperature • Supports EFT protection of 6KV DC for power line • Supports ESD 6KV DC Ethernet protection Easily-deployed and Expanded Network Designed to
PAGE 2
WGS-4215-8T2S Snooping, IP Source Guard, Dynamic ARP Inspection, 802.1x port-based network • Supports Link Aggregation access control, RADIUS and TACACS+ user accounts management, SNMPv3 –– IEEE 802.3ad Link Aggregation Control Protocol (LACP) authentication, and so on to complement it as an all-security solution.
PAGE 3
WGS-4215-8T2S –– Telnet Command Line Interface –– SNMP v1 and v2c switch management –– SSHv2, TLSv1.
PAGE 4
WGS-4215-8T2S IPv6 / IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the WGS-4215-8T2S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Robust Layer 2 Features The WGS-4215-8T2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.
PAGE 5
WGS-4215-8T2S Moreover, the WGS-4215-8T2S offers secure remote management by supporting SSHv2, TLSv1.2 and SNMP v3 connections which encrypt the packet content at each session. SNMPv3 SSHv2 Flexibility and Long-distance Extension Solution The two mini-GBIC slots built in the WGS-4215-8T2S support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance.
PAGE 6
WGS-4215-8T2S Applications ITU-T G.8032 ERPS Makes Data Transmission Uninterrupted The WGS-4215-8T2S features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology into customer’s automation network to enhance system reliability and uptime. Applying the IEEE 802.3at Power over Ethernet standard, the WGS-4215-8T2S can directly connect with any IEEE 802.
PAGE 7
WGS-4215-8T2S FTTX / MAN Application The WGS-4215-8T2S adopts the double tag VLAN (Q-in-Q) technology to provide low cost and easy operation for service providers carrying traffic for multiple customers across their networks. With two dual-speed SFP slots built in, the deployment distance of the WGS-4215-8T2S can be extended up to 120 kilometers (single-mode fiber), which provides a high-performance edge service for FTTx solutions.
PAGE 8
WGS-4215-8T2S Specifications Product WGS-4215-8T2S Hardware Specifications Copper Ports Eight 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports SFP/mini-GBIC Slots Two 100/1000BASE-X SFP interfaces, supporting 100/1000Mbps dual mode Reset Button < 5 sec: System reboot > 5 sec: Factory default System: Power (Green) LED 10/100/1000T RJ45 Interfaces (Port 1 to Port 8): 1000 LNK / ACT (Green), 10/100 LNK/ACT (Amber) 100/1000Mbps SFP Interfaces (Port 9 to Port 10): 1000 LNK / ACT (Green), 100 LNK/ACT (Amber)
PAGE 9
WGS-4215-8T2S Ring Supports ERPS, and complies with ITU-T G.8032 Security Functions Access Control List IPv4/IPv6 IP-based ACL/MAC-based ACL IPv4/IPv6 IP-based ACE/MAC-based ACE IEEE 802.
PAGE 10
WGS-4215-8T2S Accessories ■ Quick Installation Guide x 1 ■ 3-pin Terminal Block Connector x 1 ■ Wall-mounted Kit x 1 Standard Accessories ■ DIN-rail Kit x 1 ■ Magnet Kit x 1 ■ RJ45 Dust Cap x 8 ■ SFP Dust Cap x 2 Dimensions Ground 1 2 3 4 V+ PWR 9 SFP DC Input: 12-48V , 1A max. AC Input: 24~, 1A max.
PAGE 11
WGS-4215-8T2S Accessories PWR-40-24 40W 24V DC Single Output Industrial DIN-rail Power Supply (-20 ~ 70 degrees C) PWR-60-24 60W 24V DC Single Output Industrial DIN-rail Power Supply (-20 ~ 70 degrees C) PWR-75-24 75W 24V DC Single Output Industrial DIN-rail Power Supply (-20 ~ 70 degrees C) Related Products Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mounted Managed Switch WGS-4215-8P2S (-40~75 degrees C) WGS-4215-16P2S Industrial 16-Port 10/100/1000T 802.