User's Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of WGS Managed Series
WGS-4215-8T LED Indication
Figure 2-1-2b WGS-4215-8T LED Panel
System ■
LED Color Function
PWR Green
Lights to indicate that the Switch has power.
10/100/1000BASE-T Interfaces (Port-1 to Port-8) ■
LED Color Function
Lights:
To indicate the link through that port is successfully established and operating at
10/100Mbps.
1
LNK/ACT
Orange
Blinks:
t the switch is actively sending or receiving data over that port.
0/100
To indicate tha
Lights:
at To indicate the link through that port is successfully established and operating
1000Mbps.
1000
LNK/ACT
Green
Blinks:
at the switch is actively sending or receiving data over that port. To indicate th
32