User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of WGS Managed Series
RFC 3376 IGMP v3
RFC 2710 MLD v1
RFC 3810 MLD v2
Environment
Operating
Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
Storage
Temperature: -40 ~ 75 degrees C
Relative Humidity: 5 ~ 95% (non-condensing)
WGS-4215-8T / WGS-4215-8T2S
Product WGS-4215-8T WGS-4215-8T2S
Hardware Specifications
Copper Ports 8 x 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
SFP/mini-GBIC Slots ---
2 x 100/1000BASE-X SFP interfaces
Supports 100/1000Mbps dual mode
and DDM
Switch Architecture Store-and-Forward
Switch Fabric 16Gbps / non-blocking 20Gbps / non-blocking
Switch Throughput@64Bytes 11.9Mpps 14.8Mpps
Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame
10K bytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
LED
WGS-4215-8T:
Power (Green)
10/100/1000T RJ45 Interfaces (Port 1 to Port 8):
1000 LNK / ACT (Green), 10/100 LNK/ACT (Orange)
WGS-4215-8T2S:
Power (Green)
10/100/1000T RJ45 Interfaces (Port 1 to Port 8):
1000 LNK / ACT (Green), 10/100 LNK/ACT (Orange)
100/1000Mbps SFP Interfaces (Port 9 to Port 10):
1000 LNK / ACT (Green), 100 LNK/ACT (Orange)
Dimensions (W x D x H) 148 x 25 x 134 mm 178 x 25 x 134 mm
Weight 496g 663kg
Power Requirements
12V~48V DC,1A
24V AC,1A
12V~48V DC,1A
24V AC,1A
ESD Protection 6KV DC
22