User Manual

User’s Manual of WGS Managed Series
1.5 Product Specifications
WGS-804HPT
Product WGS-804HPT
Hardware Specifications
Copper Ports 8-Port 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
PoE Inject Port 4-Port with 802.3af / 802.3at PoE injector function (Port-1 to Port-4)
Switch Architecture Store-and-Forward
Switch Fabric 16Gbps/non-blocking
Switch Throughput@64 bytes 11.9Mpps @64 bytes
MAC Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
Jumbo Frame 10 Kbytes
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
LED
Power LED: Power (Green)
PoE Power Usage LED: 30W, 60W, 90W, 120W (Green)
PoE Port(Port-1 to Port-4): PoE-in-Use (Orange)
LNK/ACT (Green)
10/100/1000BASE-TX Port (Port-5 to Port-8): 1000 (Green)
LNK/ACT (Green)
Connector
 Removable 3-pin terminal block for power input
- Pin 1/2 for Power (Pin 1: V+ / Pin 2: V-)
- Pin 3 for earth ground
 DC power jack with 2.0mm central pole
Power Requirements
48~56V DC, 3A (max.)
Power Consumption/
Dissipation
Max. 152 watts/519 BTU
Dimensions (W x D x H) 148 x 25 x 134 mm
Weight 532g
ESD Protection 6KV DC
Enclosure Metal
Installation Wall mount, magnetic wall mount and DIN-rail kit
Power over Ethernet
PoE Standard IEEE 802.3af / 802.3at Power over Ethernet PSE
PoE Power Supply Type End-span
PoE Power Output
IEEE 802.3af Standard
- Per port 48V~56V DC (depending on the power supply), max. 15.4 watts
IEEE 802.3at Standard
19