Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial EthernetIndustrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mount Managed Switch (-40~75 degrees C)

WGS-4215-8P2S

Industrial 8-Port 10/100/1000T 802.3at PoE+ 2-Port

100/1000X SFP Wall-mounted Managed Switch

Easily-deployed and Expanded Network

Designed to be installed in a wall enclosure or simply mounted on a wall in any

convenient location, PLANET WGS-4215-8P2S, an innovative, Industrial 8-port

10/100/1000T 802.3at PoE + 2-port 100/1000X SFP Wall-mounted Managed Switch,

offers IPv6/IPv4 dual stack management, intelligent Layer 2 management functions,

and user-friendly interface. The WGS-4215-8P2S is able to operate reliably, stably and

quietly in any environment without affecting its performance. With a total power budget

of up to 200 watts for different kinds of PoE applications and featuring ultra networking

speed and operating temperature ranging from -40 to 75 degrees C in a compact but

rugged IP30 metal housing, the WGS-4215-8P2S is an ideal solution to meeting the

demand for the following network applications:

• Building/Home automation network

• Internet of things (IoT)

• IP surveillance

• Wireless LAN

Physical Port

• 8-Port 10/100/1000BASE-T Gigabit RJ45 copper with IEEE

802.3at PoE+ Injector function

• 2 100/1000BASE-X mini-GBIC/SFP slots

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus, end-

span PSE

• Backward compatible with IEEE 802.3af Power over Ethernet

• Up to 8 ports of IEEE 802.3af/802.3at devices powered

• Supports PoE power up to 36 watts for each PoE port

• Auto detects powered device (PD)

• Circuit protection prevents power interference between ports

• Remote power feeding up to 100 meters

• PoE management

–

Total PoE power budget control

–

Per port PoE function enable/disable

–

PoE port power feeding priority

–

Per PoE port power limitation

–

PDclassicationdetection

–

PD alive check

–

PoE schedule

Industrial Case and Installation

• Compactsizewithxedwall-mounted,magneticwall-mounted

or DIN-rail design

• IP30 metal case protection

• Supports -40 to 75 degrees C operating temperature

• Supports ESD 8KV DC Ethernet protection

• Dual power input design

–

48V~56V DC wide power input with polarity reverse protect

function

–

3-pin terminal block or DC jack connector

Switching

• Hardwarebased10/100Mbps,half/fullduplexand1000Mbps

fullduplexmode,owcontrolandauto-negotiationandauto

MDI/MDI-X

• FeaturesStore-and-Forwardmodewithwire-speedltering

and forwarding rates

• IEEE802.3xowcontrolforfullduplexoperationandback

pressureforhalfduplexoperation

• 8K MAC address table size

• 10K jumbo frame

PWR

SFP

PoE In-use

ACTLNK

PoE In-use

ACTLNK

1000

100

3 421

7 865

DC Input Range

48-56V

V+

Ground

Industrial 8-Port 10/100/1000T 802.3at PoE +

2-Port 100/1000X SFP Managed Switch

WGS-4215-8P2S

SFP

9 10

PoE

10/100/1000BASE-T 802.3at PoE+ RJ45 Port

100/1000X SFP Slot

Power LED

100/1000X SFP

LNK/ACT Status

DC Jack

3-pin Terminal Block

DC Input Range

48-56V

V+

Ground

Summary of content (10 pages)

PAGE 1
WGS-4215-8P2S Industrial 8-Port 10/100/1000T 802.3at PoE+ 2-Port 100/1000X SFP Wall-mounted Managed Switch Physical Port • 8-Port 10/100/1000BASE-T Gigabit RJ45 copper with IEEE 802.3at PoE+ Injector function • 2 100/1000BASE-X mini-GBIC/SFP slots Power over Ethernet • Complies with IEEE 802.3at Power over Ethernet Plus, endspan PSE • Backward compatible with IEEE 802.3af Power over Ethernet • Up to 8 ports of IEEE 802.3af/802.
PAGE 2
WGS-4215-8P2S Built-in Unique PoE Functions for Powered Devices Management As it is the managed PoE switch for surveillance, wireless and VoIP networks, the WGS-4215-8P2S features the following special PoE management functions: • PD alive check • Automatic address learning and address aging • Supports CSMA/CD protocol • Scheduled power recycling Layer 2 Features • PoE schedule • Supports VLAN • PoE usage monitoring –– IEEE 802.1Q tagged VLAN –– Provider bridging (VLAN Q-in-Q, IEEE 802.
PAGE 3
WGS-4215-8P2S PoE Schedule for Energy Saving Under the trend of energy saving worldwide and contributing to environmental protection, the WGS-4215-8P2S can effectively control the power supply besides its capability of giving high watts power.
PAGE 4
WGS-4215-8P2S IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the WGS-4215-8P2S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Robust Layer 2 Features The WGS-4215-8P2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.
PAGE 5
WGS-4215-8P2S Applications Security Building Automation Switch Suitable for buildings where security is strictly to be enforced, the WGS-4215-8P2S Industrial Wall-mount Managed Switch offers a comprehensive Layer 2 to Layer 4 Access Control List (ACL). The switch can restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network applications. With the WGS-4215-8P2S, a tightly-controlled network can be easily had in no time.
PAGE 6
WGS-4215-8P2S Industrial Area Switch for Data Collection and Forwarding The WGS-4215-8P2S is equipped with 8 10/100/1000Mbps ports offering auto MDI/MDIX feature providing 16Gbps non-blocking switch fabric and the 8K MAC address table so that the WGS-4215-8P2S can perform wire-speed packets transfer without the risk of packet loss. The WGS-4215-8P2S with the slimtype IP30 metal case is ideal for most heavy industrial demanding environments.
PAGE 7
WGS-4215-8P2S Specifications Product WGS-4215-8P2S Hardware Specifications Copper Ports Eight 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports PoE Inject Port Eight with 802.3at PoE+ injector function (Port-1 to Port-8) SFP/mini-GBIC Slots Two 100/1000BASE-X SFP interfaces, supporting 100/1000Mbps dual mode Switch Architecture Store-and-Forward Switch Fabric 20Gbps/non-blocking Switch Throughput@64 bytes 14.8Mpps @64 bytes MAC Address Table 8K entries Shared Data Buffer 4.
PAGE 8
WGS-4215-8P2S QoS 8 mapping IDs to 8 level priority queues - Port Number - 802.1p priority - DSCP/IP precedence of IPv4/IPv6 packets Traffic classification based, strict priority and WRR Ingress/Egress Rate Limit per port bandwidth control Security IEEE 802.
PAGE 9
WGS-4215-8P2S Drawing Ground V - 1 V+ 2 3 4 PoE PoE In-use LNK ACT PWR 9 SFP DC Input Range 48-56V 10 1000 LNK ACT 100 LNK ACT Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch WGS-4215-8P2S PoE In-use LNK ACT SFP 9 10 5 6 7 8 PoE Reset 9 10 Dimensions (unit = mm) Ordering Information WGS-4215-8P2S Industrial 8-Port 10/100/1000T 802.
PAGE 10
WGS-4215-8P2S Available Modules for WGS-4215-8P2S Gigabit Ethernet Transceiver (1000BASE-X SFP) Speed (Mbps) Connector Interface Fiber Mode Distance Wavelength (nm) Operating Temp.