Datasheet

WGS-4215-8P2S
2
• 10K jumbo frame
• Automatic address learning and address aging
• Supports CSMA/CD protocol
Layer 2 Features
• Supports VLAN
– IEEE 802.1Q tagged VLAN
– Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support
– Protocol VLAN
– Voice VLAN
– Private VLAN (Protected port)
– Management VLAN
– GVRP
• Supports Spanning Tree Protocol
– STP (Spanning Tree Protocol)
– RSTP (Rapid Spanning Tree Protocol)
– MSTP (Multiple Spanning Tree Protocol)
– STP BPDU Guard, BPDU Filtering and BPDU Forwarding
• Supports Link Aggregation
– IEEE 802.3ad Link Aggregation Control Protocol (LACP)
– Cisco ether-channel (static trunk)
• Provides port mirror (many-to-1)
• Loop protection to avoid broadcast loops
• Supports ERPS (Ethernet Ring Protection Switching)
Quality of Service
• Ingress/Egress Rate Limit per port bandwidth control
• Trafc classication
– IEEE 802.1p CoS
– TOS/DSCP/IP precedence of IPv4/IPv6 packets
• Strict priority and Weighted Round Robin (WRR) CoS
policies
Multicast
• Supports IPv4 IGMP snooping v2, v3
• Supports IPv6 MLD snooping v1, v2
• IGMP querier mode support
• IGMP snooping port ltering
• MLD snooping port ltering
Security
• Storm Control support
– Broadcast/Unknown unicast/Unknown multicast
• Authentication
– IEEE 802.1X port-based network access authentication
– Built-in RADIUS client to cooperate with the RADIUS
servers
– DHCP Option 82
– RADIUS/TACACS+ authentication
• Access Control List
– IPv4/IPv6 IP-based ACL
Snooping, IP Source Guard, dynamic ARP Inspection Protection, 802.1x port-based
network access control, RADIUS and TACACS+ user accounts management, SNMPv3
authentication, and so on to complement it as an all-security solution.
Redundant Ring, Fast Recovery for Critical Network Applications
The WGS-4215-8P2S supports redundant ring technology and features strong, rapid
self-recovery capability to prevent interruptions and external intrusions. It incorporates
advanced ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology,
Spanning Tree Protocol (802.1s MSTP) into customer’s network to enhance system
reliability and uptime in various environments.
Built-in Unique PoE Functions for Powered Devices Management
As it is the managed PoE switch for surveillance, wireless and VoIP networks, the
WGS-4215-8P2S features the following special PoE management functions:
■ PD alive check
■ Scheduled power recycling
■ PoE schedule
■ PoE usage monitoring
■ PoE extension
Intelligent Powered Device Alive Check
The WGS-4215-8P2S can be configured to monitor connected PD (Powered Device)
status in real time via ping action. Once the PD stops working and responding, the
WGS-4215-8P2S will resume the PoE port power and bring the PD back to work. It will
greatly enhance the network reliability through the PoE port resetting the PD’s power
source and reducing administrator management burden.
PD Alive Check
Restart PoE device if without response
Step 3
Checking alive status for 3 times
Step 2
No Response!
Ping Request
PoE
ON OFF
Restart PoE Device
Step 4
PoE Device Status Good!!
Step 1
Ping Request
Ping Echo
Alarm Notification