Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial EthernetIndustrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mount Managed Switch (-40~75 degrees C)

WGS-4215-8P2S

Industrial 8-Port 10/100/1000T 802.3at PoE+ 2-Port

100/1000X SFP Wall-mounted Managed Switch

Easily-deployed and Expanded Network

Designed to be installed in a wall enclosure or simply mounted on a wall in any

convenient location, PLANET WGS-4215-8P2S, an innovative Industrial 8-port

10/100/1000T 802.3at PoE + 2-port 100/1000X SFP Wall-mounted Managed Switch,

offers IPv6/IPv4 dual stack management, intelligent Layer 2 management functions,

and user-friendly interface. The WGS-4215-8P2S is able to operate reliably, stably and

quietly in any environment without affecting its performance. With a total power budget

of up to 200 watts for different kinds of PoE applications and featuring ultra networking

speed and operating temperature ranging from -40 to 75 degrees C in a compact but

rugged IP30 metal housing, the WGS-4215-8P2S is an ideal solution to meeting the

demand for the following network applications:

■ Building/Home automation network

■ Internet of things (IoT)

■ IP surveillance

■ Wireless LAN

Physical Port

• 8 10/100/1000BASE-T Gigabit RJ45 copper ports with IEEE

802.3at PoE+ injector function

• 2 100/1000BASE-X mini-GBIC/SFP ports

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus, end-

span PSE

• Backward compatible with IEEE 802.3af Power over Ethernet

• Up to 8 ports of IEEE 802.3af/802.3at devices powered

• 200-watt PoE budget

• Supports PoE power up to 36 watts for each PoE port

• Auto detects powered device (PD)

• Circuit protection prevents power interference between ports

• Remote power feeding up to 100 meters in standard mode

and 250m in extend mode

• PoE management

– Total PoE power budget control

– Per port PoE function enable/disable

– PoE port power feeding priority

– Per PoE port power limitation

– PD classication detection

– PD alive check

– PoE schedule

Industrial Case and Installation

• Compact size with xed wall-mounted, magnetic wall-mounted

or DIN-rail design

• IP30 metal case

• Supports -40 to 75 degrees C operating temperature

• Supports ESD 8KV DC Ethernet protection

• Dual power input design

– 48V~56V DC wide power input with reverse polarity

protection

– 3-pin terminal block or DC jack connector

Switching

• Hardware-based 10/100Mbps, half/full duplex and 1000Mbps

full duplex mode, ow control and auto-negotiation and auto

MDI/MDI-X

• Features Store-and-Forward mode with wire-speed ltering

and forwarding rates

• IEEE 802.3x ow control for full duplex operation and back

pressure for half duplex operation

• 8K MAC address table size

PWR

SFP

ACTLNK

1000

100

SFP

9 10

PoE-in-Use

ACTLNK

3 421

PoE

PoE-in-Use

ACTLNK

7 865

PoE

Industrial 8-Port 10/100/1000T 802.3at PoE +

2-Port 100/1000X SFP Managed Switch

WGS-4215-8P2S

ManagedFiberPoE Magnet Mounting

V+

Ground

DC Input: 48-56V

, 6A max.

10/100/1000BASE-T 802.3at PoE+ RJ45 Port

100/1000X SFP Slot

Power LED

100/1000X SFP

LNK/ACT Status

DC Jack

3-pin Terminal Block

Cybersecurity Network Solution to Minimize Security Risks

The WGS-4215-8P2S supports SSHv2 and TLS protocols to provide strong protection

against advanced threats. It includes a range of cybersecurity features such as DHCP

Summary of content (13 pages)

PAGE 1
WGS-4215-8P2S Industrial 8-Port 10/100/1000T 802.3at PoE+ 2-Port 100/1000X SFP Wall-mounted Managed Switch Physical Port • 8 10/100/1000BASE-T Gigabit RJ45 copper ports with IEEE 802.3at PoE+ injector function • 2 100/1000BASE-X mini-GBIC/SFP ports Power over Ethernet • Complies with IEEE 802.3at Power over Ethernet Plus, endspan PSE • Backward compatible with IEEE 802.3af Power over Ethernet • Up to 8 ports of IEEE 802.3af/802.
PAGE 2
WGS-4215-8P2S Snooping, IP Source Guard, dynamic ARP Inspection Protection, 802.1x port-based • 10K jumbo frame network access control, RADIUS and TACACS+ user accounts management, SNMPv3 • Automatic address learning and address aging authentication, and so on to complement it as an all-security solution. • Supports CSMA/CD protocol Layer 2 Features • Supports VLAN –– IEEE 802.1Q tagged VLAN –– Provider bridging (VLAN Q-in-Q, IEEE 802.
PAGE 3
WGS-4215-8P2S Scheduled Power Recycling The WGS-4215-8P2S allows each of the connected PoE IP cameras or PoE wireless access points to reboot at a specified time each week. Therefore, it will reduce the chance of IP camera or AP crash resulting from buffer overflow.
PAGE 4
WGS-4215-8P2S Innovative Wall-mount Installation The WGS-4215-8P2S is specially designed to be installed in a narrow environment, such as wall enclosure. The compact, flat and wall-mounted design fits easily in any space-limited location. It adopts the user-friendly “Front Access” design, making the installing, cable wiring, LED monitoring and maintenance of the WGS-4215-8P2S placed in an enclosure very convenient for technicians.
PAGE 5
WGS-4215-8P2S IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the WGS-4215-8P2S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up. Robust Layer 2 Features The WGS-4215-8P2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.
PAGE 6
WGS-4215-8P2S Friendly and Secure Management For efficient management, the WGS-4215-8P2S is equipped with Command line, Web and SNMP management interfaces. ■ With the built-in Web-based management interface, the WGS-4215-8P2S offers an easy-to-use, platform-independent management and configuration facility. ■ For text-based management, it can be accessed via Telnet and the console port. ■ By supporting the standard SNMP protocol, the switch can be managed via any SNMP-based management software.
PAGE 7
WGS-4215-8P2S Applications ITU-T G.8032 ERPS Makes Data Transmission Uninterrupted The WGS-4215-8P2S features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology into customer’s automation network to enhance system reliability and uptime. Applying the IEEE 802.3at Power over Ethernet standard, the WGS-4215-8P2S can directly connect with any IEEE 802.
PAGE 8
WGS-4215-8P2S Perfect Integration Solution for IP PoE Camera and NVR System The WGS-4215-8P2S provides 8 10/100/1000Mbps 802.3at PoE ports which can offer sufficient PoE power to 8 PoE IP cameras at the same time. In addition, with the 2 100/1000BASE-X SFP interfaces, the WGS-4215-8P2S can connect to a core fiber switch and send video streams to an NVR and monitoring center.
PAGE 9
WGS-4215-8P2S Specifications Product WGS-4215-8P2S Hardware Specifications Copper Ports Eight 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports PoE Inject Port Eight with 802.
PAGE 10
WGS-4215-8P2S 802.1Q tagged-based VLAN Up to 256 VLAN groups, out of 4094 VLAN IDs 802.1ad Q-in-Q tunneling (VLAN stacking) VLAN Voice VLAN Protocol VLAN Private VLAN (Protected port) GVRP Management VLAN Link Aggregation IEEE 802.3ad LACP and static trunk Supports 1 groups with 2 SFP ports per trunk IEEE 802.1D Spanning Tree Protocol (STP) Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.
PAGE 11
WGS-4215-8P2S IEC 60068-2-32 (free fall) Stability Testing IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) IEEE 802.3 10BASE-T IEEE 802.3u 100BASE-TX/100BASE-FX IEEE 802.3z Gigabit SX/LX IEEE 802.3ab Gigabit 1000BASE-T IEEE 802.3x Flow Control and Back Pressure IEEE 802.3ad Port Trunk with LACP IEEE 802.1D Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol IEEE 802.1s Multiple Spanning Tree Protocol IEEE 802.1p Class of Service IEEE 802.1Q VLAN Tagging IEEE 802.
PAGE 12
WGS-4215-8P2S Dimensions Ground 1 V+ 2 3 4 PoE PoE-in-Use LNK ACT PWR 9 DC Input: 48-56V SFP , 6A max. 10 1000 LNK ACT 100 LNK ACT Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch WGS-4215-8P2S PoE Fiber Managed Magnet Mounting PoE-in-Use LNK ACT SFP 9 10 5 6 7 8 PoE Reset 9 10 Unit: mm Ordering Information WGS-4215-8P2S Industrial 8-Port 10/100/1000T 802.
PAGE 13
WGS-4215-8P2S Related Products Industrial L2+ 8-Port 10/100/1000T 802.3bt PoE + 2-Port 1G/2.5G SFP Wall-mount Managed Switch with LCD WGS-5225-8UP2SV Touch Screen Industrial 8-port 10/100/1000T 802.3at PoE + 2-port 1G/2.5G SFP Wall-mount Managed Switch with LCD Touch WGS-5225-8P2SV Screen WGS-5225-8P2S Industrial 8-port 10/100/1000T 802.3at PoE + 2-port 1G/2.