Datasheet

WGS-4215-8HP2S
7
Specications
Product
WGS-4215-8HP2S
HardwareSpecications
Copper Ports 8x10/100/1000BASE-TRJ45Auto-MDI/MDI-Xports
SFP Ports
2x100/1000BASE-XSFPinterfaces
Supports 100/1000Mbps dual mode and DDM
PoE Injector Port
4 ports with 802.3b PoE++ injector function with Port-1 to Port-4
4 ports with 802.3at/af PoE+ injector function with Port-5 to Port-8
Reset Button
< 5 sec: System reboot
> 5 sec: Factory default
Dimensions(WxDxH) 245x140x36mm
Weight 853 g
Enclosure Metal
Power Requirements 48~56VDC,8A(max.)
Power Consumption/ Dissipation
Systemon:Max.4watts/13.6BTU
FullloadingwithPoEfunction:Max.382watts/1303.4BTU
ESD Protection
Contact Discharge 6KV DC
Air Discharge 8KV DC
LED
System:
PWRx1(Green)
CopperInterfaces(Port1toPort8):
1000 LNK/ACT (Green)
10/100 LNK/ACT (Orange)
PoEInterfaces(Port1toPort8):
bt PoE (Green)
af/at PoE (Orange)
SFPInterface(Port9toPort10):
1000 LNK/ACT (Green)
100 LNK/ACT (Orange)
SwitchingSpecications
Switch Architecture Store-and-Forward
Switch Fabric 20Gbps/non-blocking
Switch Throughput@64Bytes 14.88Mpps
Address Table 8K entries
Shared Data Buffer 4.1 megabits
Flow Control
IEEE802.3xpauseframeforfullduplex
Backpressureforhalfduplex
Jumbo Frame 10K bytes
Power over Ethernet
PoE Standard
IEEE 802.3bt PoE++ standard type 4 PSE
IEEE 802.3af PoE+ PSE
Backward compatible with IEEE 802.3afPoE PSE
PoE Power Supply Type 802.3bt / UPoE / End-span / Mid-span / Force
PoEPowerOutput
Per port 54V DC
−802.3btType-4mode,Port-1toPort-4:maximum90watts
−UPoEmode,Port-1toPort-4:maximum95watts
−End-spanmode:maximum36watts
−Mid-spanmode:maximum36watts
−Forcemode:maximum60watts
Power Pin Assignment
802.3bt: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
UPoE: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
End-span: 1/2(-), 3/6(+)
Mid-span: 4/5(+), 7/8(-)
PoE Power Budget up to 360 watt
Layer 2 Functions
Port Mirroring
TX/RX/both
Many-to-1 monitor
Up to 4 sessions