Datasheet

WGS-4215-8HP2S
6
Applications
Security Industry Automation Switch
Suitable for Industrial factory where security is strictly to be enforced, the WGS-4215-8HP2S offers a comprehensive Layer 2 to Layer 4 Access Control List
(ACL). The switch can restrict network access by denying packets based on source and destination IP address, TCP/UDP ports or defined typical network
applications. With the WGS-4215-8HP2S, a tightly-controlled network can be easily had in no time.
Flexible PoE Applications over Different Industrial Networks
Providing up to 4 PoE++ and 4 PoE+, in-line power interfaces, the WGS-4215-8HP2S can centrally manage power supplying to an industrial network system
where IP phones, IP cameras, wireless APs and more are built. For instance, 8 PoE IP cameras or wireless access points can be easily installed around the
corner in the industrial environment for surveillance demands or for a wireless roaming network. Without the power-socket limitation, the WGS-4215-8HP2S
makestheinstallationofIPcamerasandwirelessAPseasierandmoreefcient.
Gigabit
Ethernet Switch IP Camera
IP Camera
Serial ServerSecurity
Gate
Access
Control
Core
Fiber Switch
1000
|O|O|
WGS-4215-8HP2S
Wireless AP
Wireless AP
PoE VoIP
Internet
1000BASE-SX/LX Fiber Optic
1000
100BASE-TX UTP
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
Serial Line (RS-XXX)
|O|O|
PoE
PoE
PoE
PoE
PoE
PoE
++
PoE
++
PoE
++
PoE
++
Remote Monitoring
Fiber Switch
DC
Power Line (DC)
1000BASE-SX/LX Fiber Optic
1000
1000BASE-T UTP
PoE
1000BASE-T UTP with PoE
Freeway
Control Center
Railway
PoE Wireless
Access Point
WGS-4215-8HP2S
PoE
PoE
PTZ Speed
Dome
PTZ Speed
Dome
Factory
PoE
Splitter
PoE
DC
1000
1000
1000
Internet
WGS-4215-8HP2S
Caution
Equipment must
be grounded
PoE In: 802.3at PoE
Don’t turn “A” when
attaching “B”
Surge arrester is required and
must be grounded
The proper antenna must be
connected before powering
the AP on
1
2
A
B
WGS-4215-8HP2S