WGS-4215-Series User Manual

Table Of Contents
Users Manual of WGS Managed Series
62
configuration file to be startup-config.
Backup Configuration
The backup configuration is empty in FLASH; please save the backup
configuration first by Maintenance > Backup Manager”.
Buttons
: Click to save configuration.
4.1.2.1 Saving Configuration
In the Managed Switch, the running configuration file stores in the RAM. In the current version, the running configuration
sequence of running-config can be saved from the RAM to FLASH by Save Configurations to FLASHfunction, so that the
running configuration sequence becomes the startup configuration file, which is called configuration save.
To save all applied changes and set the current configuration as a startup configuration. The startup-configuration file will be
loaded automatically across a system reboot.
1. ClickSave > Save Configurations to FLASHto login Configuration Manager” page.
2. Select Source File = Running Configurationand Destination File = Startup Configuration”.
3. Press theApplybutton to save running configuration to startup configuration.