WGS-4215-Series User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of WGS Managed Series
240
4.9.4.2 Enable List
This page is to login list parameters. The authentication list screens in Figure 4-9-18 & Figure 4-9-19 appear.
Figure 4-9-18 New Authentication List Screenshot
The page includes the following fields:
Object Description
• List Name
Defines a name for the authentication list
• Method 1-3
Set the login authentication method:
Empty / None / Enable / TACACS+ / RADIUS
Buttons
: Click to add authentication list.
Figure 4-9-19 Login Authentication List Screenshot
The page includes the following fields:
Object Description
• List Name
Display the current list name
• Method List
Display the current method list
• Modify
Click to edit login authentication list parameter
Click to delete login authentication list entry