WGS-4215-Series User Manual
Table Of Contents
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. SWITCH MANAGEMENT
- 4. WEB CONFIGURATION
- 4.1 Main Web Page
- 4.2 System
- 4.3 Port Management
- 4.4 Link Aggregation
- 4.5 VLAN
- 4.5.1 VLAN Overview
- 4.5.2 IEEE 802.1Q VLAN
- 4.5.3 Management VLAN
- 4.5.4 Create VLAN
- 4.5.5 Interface Settings
- 4.5.6 Port to VLAN
- 4.5.7 Port VLAN Membership
- 4.5.8 Protocol VLAN Group Setting
- 4.5.9 Protocol VLAN Port Setting
- 4.5.10 GVRP Setting
- 4.5.11 GVRP Port Setting
- 4.5.12 GVRP VLAN
- 4.5.13 GVRP Statistics
- 4.5.14 VLAN setting example:
- 4.6 Spanning Tree Protocol
- 4.7 Multicast
- 4.8 Quality of Service
- 4.9 Security
- 4.10 ACL
- 4.11 MAC Address Table
- 4.12 LLDP
- 4.13 Diagnostics
- 4.14 RMON
- 4.15 Power over Ethernet
- 4.16 Maintenance
- 5. SWITCH OPERATION
- 6. TROUBLESHOOTING
- APPENDIX A Switch's RJ45 Pin Assignments
User’s Manual of WGS Managed Series
167
Figure 4-6-11 CIST Port Status Page Screenshot
The page includes the following fields:
Object Description
• Port
The switch port number of the logical STP port
• Identifier (Priority /
Port ID)
Display the current identifier (Priority / Port ID)
• External Path Cost
Conf/Oper
Display the current external path cost conf/oper
• Internal Path Cost
Conf/Oper
Display the current internal path cost/oper
• Designated Root
Bridge
Display the current designated root bridge
• External Root Cost
Display the current external root cost
• Regional Root Bridge
Display the current regional root bridge
• Internal Root Cost
Display the current internal root cost
• Designated Bridge
Display the current designated bridge
• Internal Port Path Cost
Display the current internal port path cost
• Edge Port Conf/Oper
Display the current edge port conf/oper
• P2P MAC Conf/Oper
Display the current P2P MAC conf/oper
• Port Role
Display the current port role
• Port State
Display the current port state