Manualshelf

WGS-4215-Series Quick Guide

ManualsBrandsPLANET Technology ManualsIndustrial SwitchesIndustrial 16-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mounted Managed Switch
11121314151617181920
17
The previous command would apply the following settings for the Wall-mount
Managed Switch.
IPAddress:192.168.1.100
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.254
Figure 6-3: Conguring IP Address Screen
4. Repeat step 1 to check if the IP address has changed.
6.2 StoringtheCurrentSwitchConguration
Atthe“#”prompt,enterthefollowingcommandandpress<Enter>.
# copy running-cong startup-cong
Figure 6-4: Saving Current Conguration Command Screen
If the IP is successfully congured, the Wall-mount Managed Switch will apply the
new IP address setting immediately. You can access the Web interface of the Wall-
mount Managed Switch through the new IP address.
Note
If you are not familiar with the Telnet command or the related
parameter, enter “help” anytime in console to get the help
description.