WGS-4215-Series Quick Guide

16
6.1 ConguringIPAddress
The Wall-mount Managed Switch is shipped with default IP address shown below:
IPAddress:192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please
use the procedure as follows:
 DisplayoftheCurrentIPAddress
1.Atthe “#”prompt,enter“show ip”.
2. The screen displays the current IP address shown in Figure 6-2.
Figure 6-2: IP Information Screen
 CongurationoftheIPAddress
3.At the “#” prompt, enter the following command and press <Enter> as shown
in Figure 6-3.
WGS-4215-8P2S#congure terminal
WGS-4215-8P2S(cong)#ip address 192.168.1.100 mask 255.255.255.0
WGS-4215-8P2S(cong)#ip default gateway 192.168.1.254