WGS-4215-Series Quick Guide

15
6. Telnet Login
The Wall-mount Managed Switch also supports Telnet for remote management.
The switch asks for user name and password for remote login when using Telnet;
please use “admin” for both username and password.
Default IP address: 192.168.0.100
Username:admin
Password: admin
Figure 6-1: Wall-mount Managed Switch Telnet Login Screen
The user can now enter commands to manage the Wall-mount Managed Switch.
Foradetaileddescriptionofthecommands,pleaserefertothefollowingchapters.
Note
1. For security reason, please change and memorize the new
passwordafterthisrstsetup.
2. Only accept command in lowercase letter under console inter-
face.