Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial SwitchesIndustrial 16-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mounted Managed Switch

WGS-4215-16P2S

Easily-deployed and Expanded Network

Designed to be installed in a wall enclosure or simply mounted on a wall in

any convenient location, PLANET WGS-4215-16P2S, an innovative, Industrial

16-port 10/100/1000T 802.3at PoE + 2-port 100/1000X SFP Wall-mounted

Managed Switch, offers IPv6/IPv4 dual stack management, intelligent Layer 2

management functions, and user-friendly interface. The WGS-4215-16P2S is

able to operate reliably, stably and quietly in any environment without a󰀨ecting its

performance. With a total power budget of up to 240 watts for different kinds of

PoE applications and featuring ultra networking speed and operating temperature

ranging from -10 to 60 degrees C in a flatbut rugged IP40 metal housing, the

WGS-4215-16P2S is an ideal solution to meet the demand for the following

network applications:

■ Building/Home automation network ■ Internet of things (IoT)

■ Internet of things (IoT)

■ IP surveillance

■ Wireless LAN

Industrial 16-Port 10/100/1000T 802.3at PoE+ 2-Port 100/1000X SFP

Wall-mounted Managed Switch

Physical Port

• 16-Port 10/100/1000BASE-T Gigabit RJ45 copper with IEEE

802.3at PoE+ Injector function

• 2 100/1000BASE-X mini-GBIC/SFP slots

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus, end-

span PSE

• Backward compatible with IEEE 802.3af Power over

Ethernet

• Up to 16 ports of IEEE 802.3af/802.3at devices powered

• Supports PoE power up to 36 watts for each PoE port

• Auto detects powered device (PD)

• Circuit protection prevents power interference between ports

• Remote power feeding up to 100 meters in standard mode

and 250m in extend mode

• PoE management

– Total PoE power budget control

– Per port PoE function enable/disable

– PoE port power feeding priority

– Per PoE port power limitation

– PD classication detection

– PD alive check

– PoE schedule

Industrial Case and Installation

• Compact size with xed wall-mounted, magnetic wall-

mounted or DIN-rail design

• IP40 metal case protection

• Supports -10 to 60 degrees C operating temperature

• Supports ESD 6KV DC Ethernet protection

• Dual power input design

– 48V~56V DC wide power input with polarity reverse

protect function

– 3-pin terminal block or DC jack connector

Switching

• Hardware-based 10/100Mbps, half/full duplex and 1000Mbps

full duplex mode, ow control and auto-negotiation and auto

MDI/MDI-X

• Features Store-and-Forward mode with wire-speed ltering

and forwarding rates

• IEEE 802.3x ow control for full duplex operation and back

pressure for half duplex operation

SYS

PWR

180W

240W

SFP

120W

60W

5 731

6 842

13 15119

14 161210

PoE

DC Input Range

48-56V

V+

Ground

SFP

17 18

WGS-4215-16P2S

ManagedFiberPoE+ Magnet Mounting

PoE-in-Use

LNK/ACT

PoE Usage

ACTLNK

1000

100

10/100/1000BASE-T 802.3at PoE

RJ45 Ports

100/1000X SFP Slot

Power LED

Power Usage LED

3-pin Terminal Block

100/1000X SFP

LNK/ACT Status

DC Jack

DC Input Range

48-56V

V+

Ground

Summary of content (10 pages)

PAGE 1
WGS-4215-16P2S Industrial 16-Port 10/100/1000T 802.3at PoE+ 2-Port 100/1000X SFP Wall-mounted Managed Switch Physical Port • 16-Port 10/100/1000BASE-T Gigabit RJ45 copper with IEEE 802.3at PoE+ Injector function • 2 100/1000BASE-X mini-GBIC/SFP slots Power over Ethernet • Complies with IEEE 802.3at Power over Ethernet Plus, endspan PSE • Backward compatible with IEEE 802.
PAGE 2
WGS-4215-16P2S Built-in Unique PoE Functions for Powered Devices Management • 8K MAC address table size As it is the managed PoE switch for surveillance, wireless and VoIP networks, the • 10K jumbo frame WGS-4215-16P2S features the following special PoE management functions: • Automatic address learning and address aging ■ PD alive check • Supports CSMA/CD protocol ■ Scheduled power recycling ■ PoE schedule Layer 2 Features ■ PoE usage monitoring • Supports VLAN –– IEEE 802.
PAGE 3
WGS-4215-16P2S • Access Control List 8AM 5PM 5PM 8AM –– IPv4/IPv6 IP-based ACL –– IPv4/IPv6 IP-based ACE PoE PoE PoE PoE PoE PoE PoE PoE –– MAC-based ACL –– MAC-based ACE Power On Power On Power On Power On 6 Watts 6 Watts 12 Watts 12 Watts Total consumption of 36 watts/hr Power Off Power Off Power Off Power On 6 Watts 6 Watts 12 Watts 12 Watts Save 24 watts/hr during off-business hours Total Saved = 10800 Watts/month PoE 1000Base-T UTP with PoE Innovative Wall-mount Install
PAGE 4
WGS-4215-16P2S IPv6/IPv4 Dual Stack Management Supporting both IPv6 and IPv4 protocols, the WGS-4215-16P2S helps the SMBs to step in the IPv6 era with the lowest investment as its network facilities need not be replaced or overhauled if the IPv6 FTTx edge network is set up.
PAGE 5
WGS-4215-16P2S Advanced Network Security PLANET WGS-4215-16P2S offers a comprehensive IPv4/IPv6 Layer 2 to Layer 4 Access Control List (ACL) for enforcing security to the edge. Its protection mechanism also comprises 802.1X port-based user and device authentication, which can be deployed with RADIUS to ensure the port level security and block illegal users. With the protected port function, communication between edge ports can be prevented to guarantee user privacy.
PAGE 6
WGS-4215-16P2S Perfect Integration Solution for IP PoE Camera and NVR System The WGS-4215-16P2S provides 16 10/100/1000Mbps 802.3at PoE ports which can offer sufficient PoE power to 16 PoE IP cameras at the same time. In addition, with the 2 100/1000BASE-X SFP interfaces, the WGS-4215-16P2S can connect to a core fiber switch and send video streams to an NVR and monitoring center.
PAGE 7
WGS-4215-16P2S Specifications Product WGS-4215-16P2S Hardware Specifications Copper Ports 16 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports SFP/mini-GBIC Slots 2 1000BASE-SX/LX/BX SFP interfaces(Port-17 to Port-18) Compatible with 100BASE-FX SFP PoE Injector Port 16 ports with 802.3at/af PoE injector function with Port-1 to Port-16 Switch Architecture Store-and-Forward Switch Fabric 36Gbps/non-blocking Switch Throughput@64 bytes 26.
PAGE 8
WGS-4215-16P2S IGMP Snooping IPv4 IGMP (v2/v3) snooping IGMP querier Up to 256 multicast groups Access Control List IPv4/IPv6 IP-based ACL/MAC-based ACL IPv4/IPv6 IP-based ACE/MAC-based ACE QoS 8 mapping IDs to 8 level priority queues - Port Number - 802.1p priority - DSCP/IP precedence of IPv4/IPv6 packets Traffic classification based, strict priority and WRR Ingress/Egress Rate Limit per port bandwidth control Security IEEE 802.
PAGE 9
WGS-4215-16P2S Environment Operating Temperature: -10 ~ 60 degrees C Relative Humidity: 5 ~ 95% (non-condensing) Storage Temperature: -40 ~ 85 degrees C Relative Humidity: 5 ~ 95% (non-condensing) Accessories ■ Quick Installation Guide x 1 ■ 3-pin Terminal Block Connector x 1 ■ Wall-mounted Kit x 1 ■ DIN-rail Kit x 1 ■ Magnet Kit x 1 ■ RJ45 Dust Cap x 16 ■ SFP Dust Cap x 2 Storage Temperature *Remark: The two power input interfaces don’t support power redundant function Drawing 1 245 24.
PAGE 10
WGS-4215-16P2S Ordering Information WGS-4215-16P2S Industrial 16-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mounted Managed Switch (-10~60 degrees C) Related Products WGS-4215-8P2S Industrial 8-Port 10/100/1000T 802.