Datasheet

WGS-4215-16P2S
3
– IPv4/IPv6 IP-based ACE
– MAC-based ACL
– MAC-based ACE
• MAC Security
– Static MAC
– MAC ltering
• Port security for source MAC address entries ltering
• DHCP snooping to lter distrusted DHCP messages
• Dynamic ARP inspection discards ARP packets with invalid
MAC address to IP address binding
• IP source guard prevents IP spoong attacks
• DoS attack prevention
Management
• IPv4 and IPv6 dual stack management
• Switch Management Interface
– Web switch management
– Telnet Command Line Interface
– SNMP v1 and v2c switch management
– SSHv2, TLSv1.2 and SNMP v3 secure access
• SNMP Management
– SNMP trap for interface Link Up and Link Down notication
– Four RMON groups (history, statistics, alarms and events)
• User privilege levels control
• Built-in Trivial File Transfer Protocol (TFTP) client
• Static and DHCP for IP address assignment
• System Maintenance
– Firmware upload/download via HTTP/TFTP
– Conguration upload/download through HTTP/TFTP
– Dual images
– Hardware reset button for system reboot or reset to factory
default
• SNTP Network Time Protocol
• Network Diagnostic
– Cable diagnostics
– ICMPv6/ICMPv4 Remote Ping
– SFP-DDM (Digital Diagnostic Monitor)
• Link Layer Discovery Protocol (LLDP) Protocol and LLDP-
MED
• Event message logging to remote syslog server
• PLANET Smart Discovery Utility for deployment management
• PLANET NMS system and CloudViewer for deployment
management
IP Camera
S M T W T F S
AP Router IP Phone
PoE lighting
Door Phone
Automatically Reboot
PoE Schedule for Energy Savings
Under the trend of energy saving worldwide and contributing to environmental protection,
the WGS-4215-16P2S can effectively control the power supply besides its capability of
giving high watts power. The “PoE schedule” function helps you to enable or disable
PoE power feeding for each PoE port during specied time intervals and it is a powerful
function to help SMBs or enterprises save power and budget. It also increases security
by powering off PDs that should not be in use during non-business hours.
Total Consumption of 36 watts/hr Save 24 watts/hr during off-business hours
Total Saved = 10800watts/month
6 Watts 6 Watts 12 Watts 12 Watts
PoE Schedule
08:00~17:00 17:00~08:00
6 Watts 6 Watts 12 Watts 12 Watts
OFF OFF OFF
ON ON ON ON ON
802.3at PoE+ Power and Ethernet Data Transmission Distance Extension
In the “Extend” operation mode, the WGS-4215-16P2S operates on a per-port basis at
10Mbps duplex operation but can support 20-watt PoE power output over a distance of
up to 250 meters overcoming the 100m limit on Ethernet UTP cable. With this brand-
new feature, the WGS-4215-16P2S provides an additional solution for 802.3at/af PoE
distance extension, thus saving the cost of Ethernet cable installation.
Extend Mode
Power
250 meters (820 feet)
PoE
PoE
10BASE-T UTP with PoE
PoE IP Camera
PoE Switch
Innovative Wall-mount Installation
The WGS-4215-16P2S is specially designed to be installed in a narrow environment,
such as wall enclosure. The compact, flat and wall-mounted design fits easily in any
space-limited location. It adopts the user-friendly “Front Access” design, making the
installing, cable wiring, LED monitoring and maintenance of the WGS-4215-16P2S
placed in an enclosure very convenient for technicians. The WGS-4215-16P2S can be
installed by xedwallmounting, magnetic wall mounting or DIN rail, thereby making
its usability more exible.