Datasheet

ManualsBrandsPLANET Technology ManualsIndustrial SwitchesIndustrial 16-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mounted Managed Switch

WGS-4215-16P2S

Industrial 16-Port 10/100/1000T 802.3at PoE+ 2-Port

100/1000X SFP Wall-mounted Managed Switch

Easily-deployed and Expanded Network

Designed to be installed in a wall enclosure or simply mounted on a wall in any

convenient location, PLANET WGS-4215-16P2S, an innovative, Industrial 16-port

10/100/1000T 802.3at PoE + 2-port 100/1000X SFP Wall-mounted Managed Switch,

offers IPv6/IPv4 dual stack management, intelligent Layer 2 management functions,

and user-friendly interface. The WGS-4215-16P2S is able to operate reliably, stably

and quietly in any environment without affecting its performance. With a total power

budget of up to 240 watts for different kinds of PoE applications and featuring ultra

networking speed and operating temperature ranging from -10 to 60 degrees C in a at

but rugged IP40 metal housing, the WGS-4215-16P2S is an ideal solution to meet the

demand for the following network applications:

■ Building/Home automation network

■ Internet of things (IoT)

■ IP surveillance

■ Wireless LAN

Physical Port

• 16 10/100/1000BASE-T Gigabit RJ45 copper ports with IEEE

802.3at PoE+ injector function

• 2 100/1000BASE-X mini-GBIC/SFP ports

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus, end-

span PSE

• Backward compatible with IEEE 802.3af Power over Ethernet

• Up to 16 ports of IEEE 802.3af/802.3at devices powered

• 240-watt PoE budget

• Supports PoE power up to 36 watts for each PoE port

• Auto detects powered device (PD)

• Circuit protection prevents power interference between ports

• Remote power feeding up to 100 meters in standard mode

and 250m in extend mode

• PoE management

– Total PoE power budget control

– Per port PoE function enable/disable

– PoE port power feeding priority

– Per PoE port power limitation

– PD classication detection

– PD alive check

– PoE schedule

Industrial Case and Installation

• Compact size with xed wall-mounted, magnetic wall-mounted

or DIN-rail design

• IP40 metal case

• Supports -10 to 60 degrees C operating temperature

• Supports ESD 6KV DC Ethernet protection

• Dual power input design

– 48V~56V DC wide power input with reverse polarity

protection

– 3-pin terminal block or DC jack connector

Switching

• Hardware-based 10/100Mbps, half/full duplex and 1000Mbps

full duplex mode, ow control and auto-negotiation and auto

MDI/MDI-X

• Features Store-and-Forward mode with wire-speed ltering

and forwarding rates

• IEEE 802.3x ow control for full duplex operation and back

pressure for half duplex operation

• 8K MAC address table size

SYS

PWR

180W

240W

SFP

120W

60W

5 731

6 842

13 15119

14 161210

PoE

DC Input Range

48-56V

V+

Ground

SFP

17 18

WGS-4215-16P2S

ManagedFiberPoE+ Magnet Mounting

PoE-in-Use

LNK/ACT

PoE Usage

ACTLNK

1000

100

ACTLNK

1000

100

SYS

PWR

180W

240W

SFP

120W

60W

5 731

6 842

13 15119

14 161210

PoE

SFP

17 18

WGS-4215-16P2S

ManagedFiberPoE+ Magnet Mounting

PoE-in-Use

LNK/ACT

PoE Usage

V+

Ground

DC Input Range

48-56V , 5.8A max.

10/100/1000BASE-T 802.3at PoE

RJ45 Ports

100/1000X SFP Slot

Power LED

Power Usage LED

100/1000X SFP

LNK/ACT Status

V+

Ground

DC Input Range

48-56V , 5.8A max.

3-pin Terminal Block

DC Jack

Cybersecurity Network Solution to Minimize Security Risks

The WGS-4215-16P2S supports SSHv2 and TLS protocols to provide strong protection

against advanced threats. It includes a range of cybersecurity features such as DHCP

Snooping, IP Source Guard, dynamic ARP Inspection Protection, 802.1x port-based

network access control, RADIUS and TACACS+ user accounts management, SNMPv3

authentication, and so on to complement it as an all-security solution.

Summary of content (12 pages)

PAGE 1
WGS-4215-16P2S Industrial 16-Port 10/100/1000T 802.3at PoE+ 2-Port 100/1000X SFP Wall-mounted Managed Switch Physical Port • 16 10/100/1000BASE-T Gigabit RJ45 copper ports with IEEE 802.3at PoE+ injector function • 2 100/1000BASE-X mini-GBIC/SFP ports Power over Ethernet • Complies with IEEE 802.3at Power over Ethernet Plus, endspan PSE • Backward compatible with IEEE 802.3af Power over Ethernet • Up to 16 ports of IEEE 802.3af/802.
PAGE 2
WGS-4215-16P2S • 10K jumbo frame • Automatic address learning and address aging • Supports CSMA/CD protocol Layer 2 Features • Supports VLAN –– IEEE 802.1Q tagged VLAN –– Provider bridging (VLAN Q-in-Q, IEEE 802.1ad) support –– Protocol VLAN –– Voice VLAN Redundant Ring, Fast Recovery for Critical Network Applications The WGS-4215-16P2S supports redundant ring technology and features strong, rapid self-recovery capability to prevent interruptions and external intrusions.
PAGE 3
WGS-4215-16P2S IP Camera –– IPv4/IPv6 IP-based ACE –– MAC-based ACL AP Router –– MAC-based ACE IP Phone • MAC Security –– Static MAC S M T W T F S –– MAC filtering Door Phone PoE lighting • Port security for source MAC address entries filtering • DHCP snooping to filter distrusted DHCP messages • Dynamic ARP inspection discards ARP packets with invalid Automatically Reboot MAC address to IP address binding • IP source guard prevents IP spoofing attacks PoE Schedule for Energy Savings Under the t
PAGE 4
WGS-4215-16P2S Environmentally Hardened Design With IP40, flat but rugged metal housing protection, the WGS-4215-16P2S provides a high level of immunity against electromagnetic interference and heavy electrical surges which are usually found on plant floors or in curb-side traffic control cabinets without air conditioning. Being able to operate under the temperature range from -10 to 60 degrees C, the WGS-4215-16P2S can be placed in almost any difficult environment.
PAGE 5
WGS-4215-16P2S Robust Layer 2 Features The WGS-4215-16P2S can be programmed for advanced switch management functions such as dynamic port link aggregation, 802.1Q VLAN, Q-in-Q VLAN, Multiple Spanning Tree Protocol (MSTP), Loop and BPDU Guard, IGMP Snooping, and MLD Snooping. Via the link aggregation, the WGS4215-16P2S allows the operation of a high-speed trunk to combine with multiple ports such as a 4Gbps fat pipe, and supports fail-over as well.
PAGE 6
WGS-4215-16P2S Flexibility and Long-distance Extension Solution The two mini-GBIC slots built in the WGS-4215-16P2S support SFP auto-detection and dual speed as it features 100BASE-FX and 1000BASE-SX/LX SFP (Small Form-factor Pluggable) fiber transceivers to uplink to backbone switch and monitoring center in long distance. The distance can be extended from 550 meters to 2 kilometers (multi-mode fiber) and to 10/20/40/60/80/120 kilometers (single-mode fiber or WDM fiber).
PAGE 7
WGS-4215-16P2S Applications ITU-T G.8032 ERPS Makes Data Transmission Uninterrupted The WGS-4215-16P2S features strong rapid self-recovery capability to prevent interruptions and external intrusions. It incorporates ITU-T G.8032 ERPS (Ethernet Ring Protection Switching) technology into customer’s automation network to enhance system reliability and uptime. Applying the IEEE 802.3at Power over Ethernet standard, the WGS-4215-16P2S can directly connect with any IEEE 802.
PAGE 8
WGS-4215-16P2S Perfect Integration Solution for IP PoE Camera and NVR System The WGS-4215-16P2S provides 16 10/100/1000Mbps 802.3at PoE ports which can offer sufficient PoE power to 16 PoE IP cameras at the same time. In addition, with the 2 100/1000BASE-X SFP interfaces, the WGS-4215-16P2S can connect to a core fiber switch and send video streams to an NVR and monitoring center.
PAGE 9
WGS-4215-16P2S Specifications Product WGS-4215-16P2S Hardware Specifications Copper Ports Sixteen 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports PoE Inject Ports Sixteen with 802.
PAGE 10
WGS-4215-16P2S 802.1Q tagged VLAN Up to 256 VLAN groups, out of 4094 VLAN IDs 802.1ad Q-in-Q tunneling (VLAN stacking) VLAN Voice VLAN Protocol VLAN Private VLAN (Protected port) GVRP Management VLAN Link Aggregation IEEE 802.3ad LACP and static trunk Supports 1 groups with 2 SFP ports per trunk IEEE 802.1D Spanning Tree Protocol (STP) Spanning Tree Protocol IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) IEEE 802.
PAGE 11
WGS-4215-16P2S IEC 60068-2-32 (free fall) Stability Testing IEC 60068-2-27 (shock) IEC 60068-2-6 (vibration) Standards Compliance IEEE 802.3 10BASE-T IEEE 802.3at Power over Ethernet Plus IEEE 802.3u 100BASE-TX/100BASE-FX RFC 768 UDP IEEE 802.3z Gigabit SX/LX RFC 783 TFTP IEEE 802.3ab Gigabit 1000BASE-T RFC 793 TCP IEEE 802.3x Flow Control and Back Pressure RFC 791 IP IEEE 802.3ad Port Trunk with LACP RFC 792 ICMP IEEE 802.1D Spanning Tree Protocol RFC 2068 HTTP IEEE 802.
PAGE 12
WGS-4215-16P2S Related Products Industrial L2+ 8-Port 10/100/1000T 802.3bt PoE + 2-Port 1G/2.5G SFP Wall-mount Managed Switch with WGS-5225-8UP2SV LCD Touch Screen Industrial 8-port 10/100/1000T 802.3at PoE + 2-port 1G/2.5G SFP Wall-mount Managed Switch with WGS-5225-8P2SV LCD Touch Screen WGS-5225-8P2S Industrial 8-port 10/100/1000T 802.3at PoE + 2-port 1G/2.